The Killer B

User avatar
izzo
Site Admin
Posts: 5647
Joined: Wed Jun 26, 2013 6:32 pm
Title: Save a pimp, Rent a bitch.
Cars: Too many
Location: Astoria, OR
Contact:

Re: The Killer B

Postby izzo » Fri Aug 23, 2013 10:24 pm

So, I cheers you... Glass to glass, opinions and and bullshit set aside. As the great Jrock said.. We are here, for one purpose... Datsuns.. That's at least, one thing we can all agree.
8========D ~~~ ( o Y o )
jayden71: titty ponk

devilsbullet wrote: 1400 obo. and best offer doesn't mean 300 bucks you cheap bastards
User avatar
izzo
Site Admin
Posts: 5647
Joined: Wed Jun 26, 2013 6:32 pm
Title: Save a pimp, Rent a bitch.
Cars: Too many
Location: Astoria, OR
Contact:

Re: The Killer B

Postby izzo » Wed Aug 28, 2013 10:03 pm

Got two intake gaskets, two oil pan gaskets, two valve cover gaskets, and two head gaskets in the mail from rock auto!

Friday night I will probably start tear down on the motor. I am thinking about bringing the head in the house so the valves don't get rusty. I sprayed the head down (valves etc) with WD40. I might put a little oil in a spray bottle and shoot it in the head for now just to make sure nothing rusts. Being newly machined and refreshed I don't want anything wrong with it. then I will just need to finish cleaning the block, shooting some paint, etc.. and it will be ready for install after re-assembly.


it needs a little clean up, cuz it was in a machine shop, kind of half ass assembled... then sat for a long time, has crud in the head and a little in the piston holes. Just needs a little cleaning... and should be good to go!

Image
Image
8========D ~~~ ( o Y o )
jayden71: titty ponk

devilsbullet wrote: 1400 obo. and best offer doesn't mean 300 bucks you cheap bastards
User avatar
izzo
Site Admin
Posts: 5647
Joined: Wed Jun 26, 2013 6:32 pm
Title: Save a pimp, Rent a bitch.
Cars: Too many
Location: Astoria, OR
Contact:

Re: The Killer B

Postby izzo » Fri Aug 30, 2013 7:49 pm

Image
Image
Image
Image
8========D ~~~ ( o Y o )
jayden71: titty ponk

devilsbullet wrote: 1400 obo. and best offer doesn't mean 300 bucks you cheap bastards
User avatar
RedBanner
Posts: 2503
Joined: Wed Jun 26, 2013 6:48 pm
Title: MasterBlaster
Location: vancouver , wa
Contact:

Re: The Killer B

Postby RedBanner » Sat Aug 31, 2013 10:54 pm

Continue. Please.
wayno » Sat Jul 12, 2014 9:40 pm wrote:Everything is either tight or actually rubbing.

Taterhead » Tue Aug 05, 2014 2:29 pm wrote:Datsun gods will give you one working gauge, gasoline or speedometer; you can't have both.
User avatar
izzo
Site Admin
Posts: 5647
Joined: Wed Jun 26, 2013 6:32 pm
Title: Save a pimp, Rent a bitch.
Cars: Too many
Location: Astoria, OR
Contact:

Re: The Killer B

Postby izzo » Sun Sep 01, 2013 9:43 am

Paint stripper... a quick scrape and a wash. Ill hit it lightly with a wire wheel then 180 or 300 grit and throw some new paint on iy.


Image
8========D ~~~ ( o Y o )
jayden71: titty ponk

devilsbullet wrote: 1400 obo. and best offer doesn't mean 300 bucks you cheap bastards
User avatar
Gray
Posts: 256
Joined: Thu Jun 27, 2013 9:54 pm
Cars: '74 4dr B210, '71 1200 coupe, '84 MBZ 300sd, and a 2014 Toyota Sienna.
Location: Near Portland

Re: The Killer B

Postby Gray » Mon Sep 02, 2013 12:12 pm

izzo wrote:Paint stripper... a quick scrape and a wash. Ill hit it lightly with a wire wheel then 180 or 300 grit and throw some new paint on iy.


Image

FWD valve cover either F10 or 310.
Last edited by Gray on Mon Sep 02, 2013 12:20 pm, edited 1 time in total.
aka Dguy210
User avatar
izzo
Site Admin
Posts: 5647
Joined: Wed Jun 26, 2013 6:32 pm
Title: Save a pimp, Rent a bitch.
Cars: Too many
Location: Astoria, OR
Contact:

Re: The Killer B

Postby izzo » Mon Sep 02, 2013 12:17 pm

Oh really?

FWD a14 real similar to RWD A14? Cuz my a14 that is rebuilt is missing the oil dipstick hole, and someone drilled a hole in the oil pan then globbed some welds on there for a dipstick location.
8========D ~~~ ( o Y o )
jayden71: titty ponk

devilsbullet wrote: 1400 obo. and best offer doesn't mean 300 bucks you cheap bastards
User avatar
Gray
Posts: 256
Joined: Thu Jun 27, 2013 9:54 pm
Cars: '74 4dr B210, '71 1200 coupe, '84 MBZ 300sd, and a 2014 Toyota Sienna.
Location: Near Portland

Re: The Killer B

Postby Gray » Mon Sep 02, 2013 12:22 pm

izzo wrote:Oh really?

FWD a14 real similar to RWD A14? Cuz my a14 that is rebuilt is missing the oil dipstick hole, and someone drilled a hole in the oil pan then globbed some welds on there for a dipstick location.


I ran an A14 out of an F10 on my 1200 without much problem. Even used the weird oil pan. The F10 is this superlong front sump pan, it fit but did hang down a bit low. On the B210 which is mid-sump you would have to change the oil pan to mid sump. Let me see if I can scan and post a pic. The F10 dipstick comes out of the front of the oilpan.

I also have that exact valve cover on my B210 now, the angle of the vent in the back is a bit irritating though.
aka Dguy210
User avatar
Gray
Posts: 256
Joined: Thu Jun 27, 2013 9:54 pm
Cars: '74 4dr B210, '71 1200 coupe, '84 MBZ 300sd, and a 2014 Toyota Sienna.
Location: Near Portland

Re: The Killer B

Postby Gray » Mon Sep 02, 2013 12:31 pm

Image
Image

Hard to tell from the pic but the hose makes an U shape coming off the rocker cover.
aka Dguy210
User avatar
izzo
Site Admin
Posts: 5647
Joined: Wed Jun 26, 2013 6:32 pm
Title: Save a pimp, Rent a bitch.
Cars: Too many
Location: Astoria, OR
Contact:

Re: The Killer B

Postby izzo » Mon Sep 02, 2013 12:43 pm

Well, the oil pan is custom. It doesn't look like that one. But that would explain the missing dipstick hole. Also, I noticed my B210 motor has a small thermostat housing, and this one looks like the picture above.

Fawk. I dunno if I feel comfy drilling a hole for the oil dipstick.............................................Guess I will compare the A14 in the B to the A14 on the ground and try to drill it in the same spot.


Do you know if the thermostat housing can be swapped?
8========D ~~~ ( o Y o )
jayden71: titty ponk

devilsbullet wrote: 1400 obo. and best offer doesn't mean 300 bucks you cheap bastards
User avatar
Gray
Posts: 256
Joined: Thu Jun 27, 2013 9:54 pm
Cars: '74 4dr B210, '71 1200 coupe, '84 MBZ 300sd, and a 2014 Toyota Sienna.
Location: Near Portland

Re: The Killer B

Postby Gray » Mon Sep 02, 2013 7:01 pm

izzo wrote:Well, the oil pan is custom. It doesn't look like that one. But that would explain the missing dipstick hole. Also, I noticed my B210 motor has a small thermostat housing, and this one looks like the picture above.

Fawk. I dunno if I feel comfy drilling a hole for the oil dipstick.............................................Guess I will compare the A14 in the B to the A14 on the ground and try to drill it in the same spot.


Do you know if the thermostat housing can be swapped?


I don't know. I don't see anything about the cylinder head being any different except for a boss for a clamp so it seems like it should be.

Image
aka Dguy210
User avatar
izzo
Site Admin
Posts: 5647
Joined: Wed Jun 26, 2013 6:32 pm
Title: Save a pimp, Rent a bitch.
Cars: Too many
Location: Astoria, OR
Contact:

Re: The Killer B

Postby izzo » Tue Sep 03, 2013 9:07 am

There's the two bolt holes with that clamp you speak of, then there is also this valve looking thing with threads that threads into the water outlet and has a hose connected to it. IDK what that's for... But oh well

Luckily the the thermo gasket is the same used on a billion other cars, so its easily available at any auto parts store and about fitty cents! Just checked on fuel pump gaskets, those are easily available too. The only one I can't get my hands on is an oil pump gasket. Those seem to be only avail in the gasket kits / complete. And i'm not ordering an entire gasket kit for a single gasket.

I will take my time and trace the bish out, and then cut it out of gasket paper.
8========D ~~~ ( o Y o )
jayden71: titty ponk

devilsbullet wrote: 1400 obo. and best offer doesn't mean 300 bucks you cheap bastards
User avatar
Spoona_Jay21
Posts: 241
Joined: Mon Sep 02, 2013 11:03 pm
Cars: 1978 620 KC

Re: The Killer B

Postby Spoona_Jay21 » Tue Sep 03, 2013 3:16 pm

this is AWESOME! I remember seeing it at Daves BBQ back in December. completely reminds me of why i want a B210.
Image
User avatar
izzo
Site Admin
Posts: 5647
Joined: Wed Jun 26, 2013 6:32 pm
Title: Save a pimp, Rent a bitch.
Cars: Too many
Location: Astoria, OR
Contact:

Re: The Killer B

Postby izzo » Tue Sep 03, 2013 3:21 pm

Yup ! I cruised up with brian and adam in the b, following eagle adam and a few peeps in the van
8========D ~~~ ( o Y o )
jayden71: titty ponk

devilsbullet wrote: 1400 obo. and best offer doesn't mean 300 bucks you cheap bastards
User avatar
izzo
Site Admin
Posts: 5647
Joined: Wed Jun 26, 2013 6:32 pm
Title: Save a pimp, Rent a bitch.
Cars: Too many
Location: Astoria, OR
Contact:

Re: The Killer B

Postby izzo » Sun Sep 08, 2013 3:37 pm

Image
Image
Image
8========D ~~~ ( o Y o )
jayden71: titty ponk

devilsbullet wrote: 1400 obo. and best offer doesn't mean 300 bucks you cheap bastards
User avatar
izzo
Site Admin
Posts: 5647
Joined: Wed Jun 26, 2013 6:32 pm
Title: Save a pimp, Rent a bitch.
Cars: Too many
Location: Astoria, OR
Contact:

Re: The Killer B

Postby izzo » Sun Sep 08, 2013 11:01 pm

It's getting there.

I need to get a water pump gasket (just incase this water pump is different than that of what I have a fan for, they are different over the years... So i'd rather have one just in case)

I need a thermostat housing gasket

And some RTV.

About 8 bucks in parts to finish up this motor. I am holding off, in hopes someone will buy my awesome items for sale. I can then get a different radiator, and hopefully a new clutch kit for this so I can have no worries and just rock the bish for time to come.
8========D ~~~ ( o Y o )
jayden71: titty ponk

devilsbullet wrote: 1400 obo. and best offer doesn't mean 300 bucks you cheap bastards
User avatar
RedBanner
Posts: 2503
Joined: Wed Jun 26, 2013 6:48 pm
Title: MasterBlaster
Location: vancouver , wa
Contact:

Re: The Killer B

Postby RedBanner » Mon Sep 09, 2013 10:02 am

I put a brand new clutch in it with the 5 speed. Probably still great.. unless youve ben burnin it up?
wayno » Sat Jul 12, 2014 9:40 pm wrote:Everything is either tight or actually rubbing.

Taterhead » Tue Aug 05, 2014 2:29 pm wrote:Datsun gods will give you one working gauge, gasoline or speedometer; you can't have both.
User avatar
izzo
Site Admin
Posts: 5647
Joined: Wed Jun 26, 2013 6:32 pm
Title: Save a pimp, Rent a bitch.
Cars: Too many
Location: Astoria, OR
Contact:

Re: The Killer B

Postby izzo » Mon Sep 09, 2013 10:07 am

RedBanner wrote:I put a brand new clutch in it with the 5 speed. Probably still great.. unless youve ben burnin it up?



Nope. Grabs great, wasn't sure if it was new or not. So it's only about a year old - there for I won't worry aboot it.

All I have left to do is mentioned above, two gaskets and some RTV.... Wanna come over sometime an do a motorz swappy swaps with me? It's sitting just as pictured above. I have the head in my house so it stays dry. Sitting next to my tv staying cozy and warm :rofl: (NO RUST FOR THIS HEAD BISHES)

I stopped last night to take a shower n eat. Watched a bunch of movies and passed out.
8========D ~~~ ( o Y o )
jayden71: titty ponk

devilsbullet wrote: 1400 obo. and best offer doesn't mean 300 bucks you cheap bastards
User avatar
izzo
Site Admin
Posts: 5647
Joined: Wed Jun 26, 2013 6:32 pm
Title: Save a pimp, Rent a bitch.
Cars: Too many
Location: Astoria, OR
Contact:

Re: The Killer B

Postby izzo » Sat Sep 21, 2013 5:55 pm

New radiator from eagle adam, thanks man!

Image


Ran the car at 4500 RPMS for 15 minutes straight down some back roads. Couldn't get it to get any warmer than this, sun was out, too!
8========D ~~~ ( o Y o )
jayden71: titty ponk

devilsbullet wrote: 1400 obo. and best offer doesn't mean 300 bucks you cheap bastards
User avatar
Jamee
Posts: 1727
Joined: Mon Jul 01, 2013 1:42 pm
Title: Fluffer
Cars: 1977 Datsun B210
Location: Washington

Re: The Killer B

Postby Jamee » Sat Sep 21, 2013 7:25 pm

izzo wrote:New radiator from eagle adam, thanks man!

Image

Ran the car at 4500 RPMS for 15 minutes straight down some back roads. Couldn't get it to get any warmer than this, sun was out, too!

:fyea:
:boobs:

Return to “1200/B210/210”

Who is online

Users browsing this forum: No registered users and 2 guests