What struts do I have?

User avatar
71Goon
Posts: 60
Joined: Thu Jun 27, 2013 6:27 pm

What struts do I have?

Postby 71Goon » Mon Jan 27, 2014 5:03 pm

I picked up a bunch of stuff a while ago including these struts and I was looking at them today and am not sure if they're original 510 struts or not. I was planning on removing the perches to put on some ZX struts I picked up, but I guess I'm not positive now what they're off of.

As you can see by the pic, they're stamped NISSAN with a part number of 54302 A3050 with 112 and KYB stamped below that. Overall they're 18" with about 13.75" to the bottom of the spring perch. I tried searching for the part number but nothing came up. I was cleaning them up a little so I could see the weld better before cutting but the bead looks a little sloppy like maybe someone had done the same already which is why I wanted to look them up.

Image
User avatar
DRIVEN
Posts: 5180
Joined: Thu Jun 27, 2013 7:05 pm
Location: I've been everywhere

Re: What struts do I have?

Postby DRIVEN » Mon Jan 27, 2014 5:43 pm

Did they have rotors or calipers attached? Might help us narrow it down.
When the only tool you have is a hammer every problem starts to look like a hippy.
User avatar
510freak
Global Moderator
Posts: 9454
Joined: Wed Jun 26, 2013 6:44 pm
Title: DJ Jazzy Lou
Cars: 71 510(orange,the lifer)
Location: Van Isle
Contact:

Re: What struts do I have?

Postby 510freak » Mon Jan 27, 2014 5:45 pm

DRIVEN wrote:Did they have rotors or calipers attached? Might help us narrow it down.



^^This
Taterhead » Tue Dec 08, 2015 6:35 am wrote:[quote="Taterhead » Mon Dec 07, 2015 2:41 pm


Sorry, I was channeling my inner flatcat.
User avatar
71Goon
Posts: 60
Joined: Thu Jun 27, 2013 6:27 pm

Re: What struts do I have?

Postby 71Goon » Mon Jan 27, 2014 5:50 pm

Everything was taken apart when I got it but there was a pair of 510 calipers in the box along with rotors. I never tried putting anything together since I was mainly after the l20b short block the guy had.
User avatar
71Goon
Posts: 60
Joined: Thu Jun 27, 2013 6:27 pm

Re: What struts do I have?

Postby 71Goon » Mon Jan 27, 2014 6:05 pm

The caliper brackets match up with the struts and I checked the ones installed on my car and they look to be the same length measuring to the bottom of the spring perch, so maybe just an odd number not in the catalog for some reason. The bead on them just doesn't look factory and it had me questioning exactly what they were especially since the number didn't come up.
User avatar
DRIVEN
Posts: 5180
Joined: Thu Jun 27, 2013 7:05 pm
Location: I've been everywhere

Re: What struts do I have?

Postby DRIVEN » Mon Jan 27, 2014 6:25 pm

Sounds like they're probably 510 then.
When the only tool you have is a hammer every problem starts to look like a hippy.
User avatar
Taterhead
Posts: 1755
Joined: Thu Jul 11, 2013 4:18 am
Cars: '71 510 - Mine
'72 510 - Sons
Location: Central Alabama

Re: What struts do I have?

Postby Taterhead » Tue Jan 28, 2014 6:27 am

I think Driven is correct. I don't think they are 280zx struts because:

This one is.
Overall length strut housing
Image

Close-up of that measurement
Image

From the bottom of where the perch was cut off to the bottom of the strut
Image

Also, on the side of mine it has:

NISSAN 54303 P9100
TOKICO

The stock 280zx perch is roughly 6 3/4" diameter.

From when I took measurements to convert mine to zx struts:
Stock 510 height from center of spindle to the perch is 12 1/2" - 12 3/4".
280zx's measurement is 11 1/2". From the bottom of the perch to the bottom of the tube itself is 10 3/4".

Hopefully this helps you narrow it down.

Return to “General”

Who is online

Users browsing this forum: No registered users and 1 guest