Rusty crankshaft help/ideas

Post Reply
User avatar
Taterhead
Posts: 2462
Joined: Thu Jul 11, 2013 4:18 am
Cars: '71 510 - Mine
'72 510 - Sons
Location: Central Alabama
Has thanked: 1309 times
Been thanked: 219 times

Rusty crankshaft help/ideas

#1

Post by Taterhead » Mon Dec 16, 2013 10:30 am

Ok so the next thing I felt like getting done was to clean up some parts before storing them. The crank for my car has been bugging me so I wanted to get it cleaned up so I can soak it in wd-40. I have never had to deal with one this bad (hell to be honest I've never had an engine torn down to the crank before) and was wondering what you guys & gals would do in this situation.
It looks to be just surface rust & not pitted any that I can tell.
Image

Image

Image

I know the only thing that has to be cleaned is where the bearings sit but I don't know what to use. I've tried steel wool with wd-40, someone I know mentioned naval jelly but I have no clue where to get some. I was thinking emery cloth and wd-40 maybe. I think a dremel and wire wheel would probably scratch it up to much or leave it with high/low spots or grooves. I don't want to take it to the machine shop to have it milled off (don't want to get bigger bearings)
In Alabama we don't have l20's laying around in the grass so it's not like I can run out & get another and shipping one from the left coast might get pricey (with Christmas here $ is scarce). I might end up having to wait for something to show up at pull a part with an l20 in it & just go rob that. Like most of you know, I'm slower than stink of of shit when it comes to getting stuff done and I'm a cheap ass bastard and want to spend as little as possible.


Like always, thanks for any and all help.

User avatar
71Goon
Posts: 60
Joined: Thu Jun 27, 2013 6:27 pm

Re: Rusty crankshaft help/ideas

#2

Post by 71Goon » Mon Dec 16, 2013 11:24 am

That looks pretty rough but if it isn't pitted you might be able to get away with having it polished which many machine shops can do and isn't nearly as expensive as having it ground. I'd call around to local shops and find one that offers polishing and not just grinding. In my area, there are several shops that have the ability to polish in-house but send grinds out.

Image

User avatar
datsunmike
Posts: 554
Joined: Sat Jun 29, 2013 1:07 pm
Location: 49. 37. 124. 75
Been thanked: 1 time

Re: Rusty crankshaft help/ideas

#3

Post by datsunmike » Mon Dec 16, 2013 12:26 pm

.
Last edited by datsunmike on Tue Jan 14, 2014 5:40 pm, edited 1 time in total.
My Datsuns, like good friends, have never let me down. At least in any way that was not understandable and thus fixable.

User avatar
Taterhead
Posts: 2462
Joined: Thu Jul 11, 2013 4:18 am
Cars: '71 510 - Mine
'72 510 - Sons
Location: Central Alabama
Has thanked: 1309 times
Been thanked: 219 times

Re: Rusty crankshaft help/ideas

#4

Post by Taterhead » Mon Dec 16, 2013 2:51 pm

Thanks for the input. I'd rather look at soaking it in something or a rust remover of some sort than to send it off but it is an option. So what you're saying Mike is remove it as best as I can & run it?

User avatar
datsunmike
Posts: 554
Joined: Sat Jun 29, 2013 1:07 pm
Location: 49. 37. 124. 75
Been thanked: 1 time

Re: Rusty crankshaft help/ideas

#5

Post by datsunmike » Mon Dec 16, 2013 5:08 pm

.
Last edited by datsunmike on Tue Jan 14, 2014 5:40 pm, edited 1 time in total.
My Datsuns, like good friends, have never let me down. At least in any way that was not understandable and thus fixable.

User avatar
510freak
Global Moderator
Posts: 9706
Joined: Wed Jun 26, 2013 6:44 pm
Title: DJ Jazzy Lou
Cars: Boo no 510 lol
Location: Van Isle
Has thanked: 6 times
Been thanked: 7 times
Contact:

Re: Rusty crankshaft help/ideas

#6

Post by 510freak » Mon Dec 16, 2013 7:08 pm

What Mike said,see if it is pitted
Pics are hard to tell right now
Taterhead » Tue Dec 08, 2015 6:35 am wrote:[quote="Taterhead » Mon Dec 07, 2015 2:41 pm


Sorry, I was channeling my inner flatcat.

User avatar
Taterhead
Posts: 2462
Joined: Thu Jul 11, 2013 4:18 am
Cars: '71 510 - Mine
'72 510 - Sons
Location: Central Alabama
Has thanked: 1309 times
Been thanked: 219 times

Re: Rusty crankshaft help/ideas

#7

Post by Taterhead » Tue Dec 17, 2013 6:30 am

Thanks guys. Let me see what I can get cooked up.

User avatar
DRIVEN
Posts: 7633
Joined: Thu Jun 27, 2013 7:05 pm
Location: I've been everywhere
Has thanked: 1166 times
Been thanked: 1138 times

Re: Rusty crankshaft help/ideas

#8

Post by DRIVEN » Tue Dec 17, 2013 6:54 am

Electrolytic method in a plastic tub?
When the only tool you have is a hammer every problem starts to look like a hippy.

User avatar
Taterhead
Posts: 2462
Joined: Thu Jul 11, 2013 4:18 am
Cars: '71 510 - Mine
'72 510 - Sons
Location: Central Alabama
Has thanked: 1309 times
Been thanked: 219 times

Re: Rusty crankshaft help/ideas

#9

Post by Taterhead » Fri Dec 27, 2013 2:22 pm

I will look into this^^^^


Small update:

Naval jelly sucks. I will try to pick up something else in the next few days.

This is after 3 or 4 treatments of NJ. Better, but not good enough for me.

Image

Image

Image

Image

Post Reply