dog leg 5 speed $200

[bonvo]

dogleg 5 speed came with the truck i just bought i have no need for it perfect swap for a 510 or 521 no need to mess with the drive line it even has the 521 slip yoke in it only thing i dont have is the shifter $200 takes her located in LaPine oregon half hour south of bend

[MicroMachinery]

Flatcat might want this.. I know he was looking for one.

[bonvo]

I'll shot him a pm then. Here is a video of me manually cycling the gears

[flatcat19]

Will any L shifter fit into this? Do you have the fork?

[Laecaon]

Im using a 620 shifter in my dogleg, I had to bend it with a propane torch (I suggest something hotter than propane, that took forever).

[bonvo]

you will need the later type shifter but that should be easy to track down

no fork but the forks all interchange if i remember right ill double check with mike

[jayden71]

Im using a 720 shifter in my dogleg. I think its the same as the 620. I also have a Shorty shifter I like to use.J.ust need to find some bushings for it.

Also...thats a decent deal on a dogleg. They getting hard to find and thats pretty close to what I paid for mine.GLWS man.

[izzo]

150-250 sometimes 300 is the range. You're dead on price wise. And look, its already cleaned!

This is a good deal. Any datsun shifter will fit as long as its not the later 720 styled "Ear" shifter... I am using the B210 shifter in my L series trans. If its that big of a deal, I think I still have a couple L series shifters laying around someone can have for free if they buy this. You would just need to order the bushing kit for 8 bucks off ebay as the brass shifters are long gone (i lost them).

[draker]

Im using a 720 shifter in my dogleg. I think its the same as the 620. I also have a Shorty shifter I like to use.J.ust need to find some bushings for it.

Also...thats a decent deal on a dogleg. They getting hard to find and thats pretty close to what I paid for mine.GLWS man.

I used a short 720 trans shifter. It's bent a bit but should be okay for temp.

[flatcat19]

Do want. Just really curious about the shift fork.

[draker]

Do want. Just really curious about the shift fork.

Me too.. I was planning on using the one from my 4sp.. hope it works. lol

[bonvo]

the forks should interchange also consider good running l20b lower end as trade lol

[flatcat19]

Bonvo, I'm going to PM you later on about this.

[Rustina]

Can I come and pick this up today?

[Laecaon]

Even if Bonvo had this still, which is a possibility... He lives in the south east part of Oregon. Think, way the fuck farther than Bend. Send him a PM.

[laotsu]

It's mine, I paid for it, I just have to go get it.