the mine now coupe.

[RedBanner]

Looks like I need a set of needles, size m83 or just run this a14 rich as hell mid and top end.

[RedBanner]

Modified a modified z car airbox I made for a single weber 45, now remodded for duel sus



Got about 4 passes around with my spot welds, probably take 8 more. Sheesh.

Bout an inch more clearence than my dome filters at the carb bore.


Looks kinds cool, will go clear up to the core support too, and filters are only 4$

[RedBanner]

Still less than my dome filters well past the master.

[Mattndew76]

That is a clean mod!! I likey.

[RedBanner]

Thanks.

[izzo]

I Rikey too man! Cool mod for shiz

[Eagle_Adam]

Bueno!!!!!!

Can't wait to see this one running!

[Eagle_Adam]

Dbl post fail

[RedBanner]

So, besides the fuelpump, ive done everything I can, time to pull the 12 and make some mounts.
I stabbed the trans, for those of you that dont know there are 6 long bolts in just the top half of the bellhousing, ive ran em wit 2 before tho. Not this time

Rebushinged the shift, the stock plastic ones where gone, used ford door hinge bushings tho.

Now there Brass.
Also I had to go to 4 places to find a 1/4" t for my fuel lines. Then I didnt like how it looked, so I modified another stock datsun peice to fit. Might reconize it. One more peice out of the emissions delete scrap pile! Actualy its more like the "I just installed a 32/36 scrap pile, but whatever, you can see my thermostat housing to a kit at one time in this pic too, flat sided.


It has a restricted side to regulate the return pressure, so I cut that off and gently straightend it out.
Not the prettiest but I like it alot more than the rubber hose and t.



I think if I had some sort of roller to straighten it out gently I would be completly satisfied, but ill probably never change it if it works lol, double flaired both ends so it seals well.
Aslo found out the ei dizzy I had with this motor is pretty loose, but the 1200 already has ei so I have that one.
Mounted my 80 210 ir alt as well.
And finished welding my airbox.
But now its baxk to bed, cause I work at 7, so I leave at 530 pm. Long night tonight so maybe nothing tomarow

[RedBanner]

As comparison, heres the fuel line with the t.

Versus the stock fuel/fuel return line cut and bent.

[B-keeper]

Banner, I bought a NOS twin fuel line from Z therapy for $25 at Canby 2013. I can grab you the part # if you would like.

Mike

[RedBanner]

Thanks man, id like to have that around,
Im pushing the 1200 into the shop right now to drain the fluids and start pulling it apart.
But I just worked 16 hours with a 2hour round trip, and another tomaro, so I dont know how far I will get, beet tired, and I stop when I start making mistakes, wich was about 3 hours ago, lol

[RedBanner]

Got all the wires and hoses disconnected, have to.do.for now, gotta go to work in 4 hours
Also, as Driven suggested I got soke z seat, pretty great condition, should cleean up great!

[RedBanner]

Oops I.see I fergot the alt wires.

[izzo]

Is it in yet?

[DRIVEN]

^^Hehe^^

[B-keeper]

Part # is 17523-H2302

You cant feel it Izzo?

[flatcat19]

Where are you working at, Banner?

[RedBanner]

Woodburn. Remodeling the woodburn outlet malls

[B-keeper]

Woodburn. Remodeling the woodburn outlet malls

KEWL I painted all the signage at that mall 15-20 yrs ago. Imagine that big monument, in its parts. inside an automotive paint booth.