Anyone ever had to use a lower profile reverse light switch

[draker]

I'm running into some clearance issues with the reverse light switch on 69 510 with a dogleg 5 speed. I have the T3 crossmember (VG30 clone) with the Z mount and the switch hits the tunnel. The neutral switch location clears just fine. I believe this is the 63A. I'll post pictures tonight if I have time.
 
I'm looking for some low profile reverse switches.
 
This one certainly looks promising..
 

 
 
 
Anyone ran into this with the T3 crossmember and a dogleg?

[Laecaon]

Yea, I had issues, the tunnel broke the terminals off the switch.

Seems like a good idea...

[draker]

Yea, I had issues, the tunnel broke the terminals off the switch.

Seems like a good idea...

Thanks, I ordered it. We'll see what happens.

[draker]

At this point, it does not work. I haven't given up on it quite yet though. Still more work to be done!

[draker]

Switch did not work due to the plastic plunger being about 1/8 inch to short. There may be other workable options out there.. but this didnt work. Modifying the switch resulted in failed switch.