Gray Man, Inc.

User avatar
DRIVEN
Posts: 7696
Joined: Thu Jun 27, 2013 7:05 pm
Location: I've been everywhere
Has thanked: 1204 times
Been thanked: 1180 times

Re: Gray Man, Inc.

#241

Post by DRIVEN »

Turned the garden under along with some hard packed virgin soil. Should be able to grow 2000 square feet next year if I use it all.

Image

Image

I strapped the new chain on the 036 and got about 1/2 way through the wood I had left when it suffered a pulmonary embolism. Not sure where the clot came from but it embedded in the lower ring and ruined the cylinder. If you can't breathe, you can't run. Parts are on order.


Image

Image
When the only tool you have is a hammer every problem starts to look like a hippy.
BLUE
Posts: 1813
Joined: Wed Jun 26, 2013 6:48 pm
Cars: (3) s30's , (2) s130's
Location: Unknown
Has thanked: 669 times
Been thanked: 243 times

Re: Gray Man, Inc.

#242

Post by BLUE »

Condolences on the Stihl.

2000 sq ft of homegrown potential is exciting
DRIVEN » Sat Oct 11, 2014 10:24 am wrote:
1. Make progress until broke.
2. Go make mo money.
3. Repeat.
User avatar
Taterhead
Posts: 2488
Joined: Thu Jul 11, 2013 4:18 am
Cars: '71 510 - Mine
'72 510 - Sons
Location: Central Alabama
Has thanked: 1350 times
Been thanked: 232 times

Re: Gray Man, Inc.

#243

Post by Taterhead »

Hell yeah and hell no in the same post.
User avatar
DRIVEN
Posts: 7696
Joined: Thu Jun 27, 2013 7:05 pm
Location: I've been everywhere
Has thanked: 1204 times
Been thanked: 1180 times

Re: Gray Man, Inc.

#244

Post by DRIVEN »

DRIVEN wrote: Wed Jun 01, 2022 6:56 pm I guess its probably safe to discuss now, as i'm finally gettting over the trauma. I was down watering my fruit trees last week and got attacked by a mountain lion.

Image


It silently crept out of the tall grass behind my shop and immediately went for my femoral artery. Clearly, an apex predator. It seemingly came out of nowhere but was somehow everywhere all at once. I somehow managed to subdue it. Brown dog and I tried for almost an hour to domesticate it, but it was hopeless. We had no choice but to relocate it to a friend's wildlife refuge (farm). God have mercy on the rodent population of Canyon County.

Image
All grown up.

Image
When the only tool you have is a hammer every problem starts to look like a hippy.
User avatar
DRIVEN
Posts: 7696
Joined: Thu Jun 27, 2013 7:05 pm
Location: I've been everywhere
Has thanked: 1204 times
Been thanked: 1180 times

Re: Gray Man, Inc.

#245

Post by DRIVEN »

Rode with my brother yesterday.
Image
Succor Creek canyon.
Image

Wild horses.

Image


Image

Leslie Gulch and the upper Owyhee River.
Image

Image
Seasonal hot spring
Image

Image

Rando mine
Image
Like a Rock
Image
When the only tool you have is a hammer every problem starts to look like a hippy.
User avatar
Taterhead
Posts: 2488
Joined: Thu Jul 11, 2013 4:18 am
Cars: '71 510 - Mine
'72 510 - Sons
Location: Central Alabama
Has thanked: 1350 times
Been thanked: 232 times

Re: Gray Man, Inc.

#246

Post by Taterhead »

Good times
User avatar
DRIVEN
Posts: 7696
Joined: Thu Jun 27, 2013 7:05 pm
Location: I've been everywhere
Has thanked: 1204 times
Been thanked: 1180 times

Re: Gray Man, Inc.

#247

Post by DRIVEN »

Image

Image

Image

Image

Image
When the only tool you have is a hammer every problem starts to look like a hippy.
User avatar
Taterhead
Posts: 2488
Joined: Thu Jul 11, 2013 4:18 am
Cars: '71 510 - Mine
'72 510 - Sons
Location: Central Alabama
Has thanked: 1350 times
Been thanked: 232 times

Re: Gray Man, Inc.

#248

Post by Taterhead »

Oh man. Something’s going on. You’ve probably already said what and I just forgot. And, I love the snow. Much better than the tornadoes we got down here last night.
User avatar
DRIVEN
Posts: 7696
Joined: Thu Jun 27, 2013 7:05 pm
Location: I've been everywhere
Has thanked: 1204 times
Been thanked: 1180 times

Re: Gray Man, Inc.

#249

Post by DRIVEN »

Taterhead wrote: Wed Nov 30, 2022 8:22 am Oh man. Something’s going on. You’ve probably already said what and I just forgot. And, I love the snow. Much better than the tornadoes we got down here last night.

"I mentioned a cabin / tiny house build a while back. Looks like that project will kick off in a couple weeks."

I was off by the timeline but it's definitely happening. Projected finish date is 5/23.
When the only tool you have is a hammer every problem starts to look like a hippy.
User avatar
DRIVEN
Posts: 7696
Joined: Thu Jun 27, 2013 7:05 pm
Location: I've been everywhere
Has thanked: 1204 times
Been thanked: 1180 times

Re: Gray Man, Inc.

#250

Post by DRIVEN »

We prepped everything on Wednesday. It was below freezing and really windy so we hid out under the lean-to at the end of the shop. Precut all the joists and sheeting. Then built the 2 skids. I punched 2.5" holes at each end as grapple points if it ever needs to be moved.
Image

Image

Image

This morning we recessed and leveled the blocks. The skids are there temporarily as a level surface.

Image


The platform as you currently see it is upside-down. Brackets are in place to attach the skids before we flip it.
3/4" sheeting goes on top. R21 insulation fills the void.
Image

Image
When the only tool you have is a hammer every problem starts to look like a hippy.
BLUE
Posts: 1813
Joined: Wed Jun 26, 2013 6:48 pm
Cars: (3) s30's , (2) s130's
Location: Unknown
Has thanked: 669 times
Been thanked: 243 times

Re: Gray Man, Inc.

#251

Post by BLUE »

Ooooohhhhhhh I’ll be watching this.....
DRIVEN » Sat Oct 11, 2014 10:24 am wrote:
1. Make progress until broke.
2. Go make mo money.
3. Repeat.
User avatar
DRIVEN
Posts: 7696
Joined: Thu Jun 27, 2013 7:05 pm
Location: I've been everywhere
Has thanked: 1204 times
Been thanked: 1180 times

Re: Gray Man, Inc.

#252

Post by DRIVEN »

Skids slipped out from underneath and attached. Base flipped over. Insulation and decking on.
Image

Image

Image

Image

Last 2 deck sheets are in place but not nailed until I run the drains. Need to get another load of lumber before we can proceed. All tucked under the tarps until work and weather permits further progress.
When the only tool you have is a hammer every problem starts to look like a hippy.
User avatar
wayno
Posts: 5309
Joined: Thu Jun 27, 2013 8:44 pm
Location: Vancouver WA
Has thanked: 430 times
Been thanked: 1295 times

Re: Gray Man, Inc.

#253

Post by wayno »

DRIVEN wrote: Sun Oct 30, 2022 4:36 pm Turned the garden under along with some hard packed virgin soil. Should be able to grow 2000 square feet next year if I use it all.

Image

Image

I strapped the new chain on the 036 and got about 1/2 way through the wood I had left when it suffered a pulmonary embolism. Not sure where the clot came from but it embedded in the lower ring and ruined the cylinder. If you can't breathe, you can't run. Parts are on order.


Image

Image
I guess I missed this post, when I posted about using railroad ties for the garden and bring in 3-way soil in them areas I was unsure of your soil quality, I also did not see you had tilled your garden area, if I had the room I would put more room between my rows.
“The difference between genius and stupidly is that genius has its limits” Albert Einstein
User avatar
Taterhead
Posts: 2488
Joined: Thu Jul 11, 2013 4:18 am
Cars: '71 510 - Mine
'72 510 - Sons
Location: Central Alabama
Has thanked: 1350 times
Been thanked: 232 times

Re: Gray Man, Inc.

#254

Post by Taterhead »

Nice. Good idea on the insulation. When I enclosed a back porch at my last house I installed chicken wire on the bottom of the joists and laid the insulation in.


Is that wood treated or is that something you’ll do afterwards? Do y’all have to deal with termites up there?
User avatar
DRIVEN
Posts: 7696
Joined: Thu Jun 27, 2013 7:05 pm
Location: I've been everywhere
Has thanked: 1204 times
Been thanked: 1180 times

Re: Gray Man, Inc.

#255

Post by DRIVEN »

Not treated, and likely never to be an issue. I worry more about field mice than insects around here. The structure is off the ground so there's no direct contact with soil/moisture.

I honestly hesitated about posting anything about it. I'm not a builder so I'm sure there's plenty to critique. But in reality, it's just going to be a fancy storage shed.
When the only tool you have is a hammer every problem starts to look like a hippy.
User avatar
Taterhead
Posts: 2488
Joined: Thu Jul 11, 2013 4:18 am
Cars: '71 510 - Mine
'72 510 - Sons
Location: Central Alabama
Has thanked: 1350 times
Been thanked: 232 times

Re: Gray Man, Inc.

#256

Post by Taterhead »

By all means continue posting. I just know that down here termites and powder post beetles can wreak havoc on untreated wood. Your climate is different and I didn’t know if they were really a problem there. And I am nowhere near a builder or contractor, just stuff I’ve picked up along the way. In all reality, if they ever become a concern you can self treat with stuff you can get at a farmers co-op and probably Home Depot or lowes.

Boxing in the insulation the way you did will definitely negate mice making homes in it.

Looking forward to seeing more.
User avatar
DRIVEN
Posts: 7696
Joined: Thu Jun 27, 2013 7:05 pm
Location: I've been everywhere
Has thanked: 1204 times
Been thanked: 1180 times

Re: Gray Man, Inc.

#257

Post by DRIVEN »

Termites don't seem to be much of an issue around here. We have a contract with an exterminator who sprays every 3 months inside and outside the house and shop. Mainly because my wife hates spiders and earwigs. Even in the shop, which has plenty of gaps, I rarely see insects of any kind.
When the only tool you have is a hammer every problem starts to look like a hippy.
User avatar
DRIVEN
Posts: 7696
Joined: Thu Jun 27, 2013 7:05 pm
Location: I've been everywhere
Has thanked: 1204 times
Been thanked: 1180 times

Re: Gray Man, Inc.

#258

Post by DRIVEN »

Over Thanksgiving my brother and I were discussing plans and ideas for next summer's long trail ride. Giant Loop started a sale last Monday. Things...escalated.
Image
When the only tool you have is a hammer every problem starts to look like a hippy.
User avatar
DRIVEN
Posts: 7696
Joined: Thu Jun 27, 2013 7:05 pm
Location: I've been everywhere
Has thanked: 1204 times
Been thanked: 1180 times

Re: Gray Man, Inc.

#259

Post by DRIVEN »

Split my cracked case and cleaned all the innards. Then cleaned up a crusty XT head pipe.
Image

Image

Image

Image

Image

Image


My replacement cases still need some cleaning before I can put it together. I'm going to swap the head on my white bike first before I build this engine for the blue bike.
When the only tool you have is a hammer every problem starts to look like a hippy.
User avatar
DRIVEN
Posts: 7696
Joined: Thu Jun 27, 2013 7:05 pm
Location: I've been everywhere
Has thanked: 1204 times
Been thanked: 1180 times

Re: Gray Man, Inc.

#260

Post by DRIVEN »

New cases all cleaned up.
Image

Popped the bearings out of the old case halves just to have some spares.

Image

Started putting it back together. Dry fit everything and checked the transmission. 1-6 + N all present and accounted for.

Image

I've got a woodruff key and some lock washers on order so it's set aside for now.

Image
When the only tool you have is a hammer every problem starts to look like a hippy.
Post Reply