New World Datsuns...

datsunfreak wrote:

DRIVEN wrote:Flatcat has a fairly solid plan for it. Should turn out pretty cool...if he ever actually starts it.

Repo it. Send it to me. :mrgreen:

This is the project I PM'd you about.

I have the A10 crossmember.
L18 with front sump oil pan and pick up, SUs, W53.

Need:
5 speed/drive line and a radiator so far.
Wheels.

I will have a spare 5speed when I pull it from my 620.....

And I have at least half a dozen rads in storage

what kinda wheels you be lookin for?

izzo wrote:what kinda wheels you be lookin for?

How soon we forget...



Problem though...

B-Keeper offered these up right after I got the A10.
He said he'll hold them for a while after we discussed price.

Dream wheels. Appliance 14x7s. 0offset.
Go ahaead an go fap. We'll stay here.

So I was talking with him the other day.
I need to jump fast or his kid will put these on his 1200.

I said no. Too big for 1200. lulz.

Between the 210, travel to Portland and Xmas right around the corner-times are tight.
:crossed-fingers:

flatcat19 wrote:I said no. Too big for 1200.

That may actually be true. I ran 14X6 on my 1200 and they were close. 13X7 rubbed in turns. If it's lowered at all I think 14X7 will probably rub.

B-KEEPER!!! COME READ THIS!!!

lulz.
I'm hustling my ass at work.
Need the kids to have an awesome Xmas, and I need some wheels.

DRIVEN wrote:

flatcat19 wrote:I said no. Too big for 1200.

That may actually be true. I ran 14X6 on my 1200 and they were close. 13X7 rubbed in turns. If it's lowered at all I think 14X7 will probably rub.

My old 1200 I put on 185/60/14 on the zx 6 spokes,they rubbed

These will probably stick out.

Flares and a 200sx rear end.

Watch your S110, Lou.

flatcat19 wrote:These will probably stick out.

Flares and a 200sx rear end.

Watch your S110, Lou.

Its parked between the yota and the suv,safe I hope

Ok, so a 1200 will tuck a 7 inch wide wheel fine. If there a +25mm basicly an early fwd off set.... and no turning allowed lol. 13x7 0 offset poke. Even with 175/50 series tires they rub. Or id be rockin the libres on my 1200. Stock height and they rubbed.

But those would tuck great on the 210, basicly whats on there now.

This is the B-Keeper we speak of.

He'll just make some flares or some shit.

Hustle! Hustle! Hustle!

RedBanner wrote:But those would tuck great on the 210, basicly whats on there now.

And would loooooook soooooooooooooo goooooooooooooooooooooooooooooooood!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1

Keith....



paging Keith



call me or banner bro

No need. Owned.

Lock it up!

IBTL

We don't have many of those 'round here.

LOL I know just sayin

so whats up?

Mine.