Page 2 of 2
Re: izzo's dime
Posted: Mon Jul 01, 2013 5:08 pm
by flatcat19
Can anyone else see izzo's pics?
Re: izzo's dime
Posted: Mon Jul 01, 2013 5:17 pm
by Laecaon
You dont know photobucket very well if you are asking that.
Photobucket has a bandwidth limit for each user (unless you go pro?) when you exceed for the month, they replace with that picture.
Its why I dont use photobucket.
Re: izzo's dime
Posted: Mon Jul 01, 2013 5:21 pm
by izzo
Good thing gaskets only start leaking once.
Re: izzo's dime
Posted: Mon Jul 01, 2013 5:24 pm
by flatcat19
Laecaon wrote:You dont know photobucket very well if you are asking that.
Photobucket has a bandwidth limit for each user (unless you go pro?) when you exceed for the month, they replace with that picture.
Its why I dont use photobucket.
izzo has been exceeding for the year.
I never see his pics.
When one month is up-do all his pics come back?
Re: izzo's dime
Posted: Mon Jul 01, 2013 6:46 pm
by izzo
Correct!
Lol, strange they have been showing up the rest of the year. Just this month. Ill see when its due for a lapse.
Re: izzo's dime
Posted: Wed Jul 03, 2013 3:06 pm
by izzo
Well, tomorrow the pics will work again. I took it off craigs list, but one person is very excited in seeing the car. I meet up with him about 2 hours from here in portland friday. He's seems pretty confident in buying it. Sad to see her go after all the work.....
Ive had a hand full of five tens. This won't be the last, wonder what it will bring in the next episode....
Re: izzo's dime
Posted: Wed Jul 03, 2013 10:49 pm
by datmo
I know you have an l18 but that's similar to an l16 and also similar to an l20.
I bought a champion radiator for my l16 and wondered if itd work on an l20?
I wanna do my own swap.
and btw. SICK ASS GOON.
I would buy that 521 if i could.
Re: izzo's dime
Posted: Wed Jul 03, 2013 10:54 pm
by izzo
521 is gone.
Champion radiator should be fine, specially if its aluminum! Just measure to make sure it fits, top to bottom, side to side, and there is room for the fan. Also make sure the inlet/outlet is on the right side. You can make brackets to use the original holes or just drill some new holes for the radiator and mount it.
A stock 510 radiator is enough to cool an L16/18/20 and even an L series with a slight build. If you use a stock radiator, just have it flushed. It makes a difference.
Re: izzo's dime
Posted: Wed Jul 03, 2013 10:56 pm
by datmo
my old radiator literally had a hole so it wasnt worth it.
now i run this champion radiator with my l16 so im assuming it'll do plenty good the same position it's in right now.
thanks izzo
Re: izzo's dime
Posted: Wed Jul 03, 2013 10:57 pm
by izzo
Ah yes that will be fine
