New World Datsuns...

Taken this morning ( I REALLY need to wash the car ... d'oh !)

Put the snow-flakes on her for now... they're a bit wider than what was on there (195/75/14's on the slotted mag's)
205/60/15's ? I believe on the snowy's.

Sunday Blue 73 240z pictures 071413 003 by 71240z, on Flickr


Sunday Blue 73 240z pictures 071413 001 by 71240z, on Flickr


Sunday Blue 73 240z pictures 071413 002 by 71240z, on Flickr


Sunday Blue 73 240z pictures 071413 004 by 71240z, on Flickr


Sunday Blue 73 240z pictures 071413 009 by 71240z, on Flickr


Sunday Blue 73 240z pictures 071413 011 by 71240z, on Flickr

They look great

those side walls are way to big you need low pro's

ArchetypeDatsun wrote:They look great

Thanks man ! . I'm happy with em for the moment ya know

dislexicdime wrote:those side walls are way to big you need low pro's

could def be sharper looking for sure !

(I was chuckling thinking a bit about that this morning)

haha. Wheels look good. Tires do need moar smaller. But really its a typical looking tire on a Z right meow. Dump it on its ass and run some honda accord wheels man trolol

izzo wrote:haha. Wheels look good. Tires do need moar smaller. But really its a typical looking tire on a Z right meow. Dump it on its ass and run some honda accord wheels man trolol

Thanks Tim and does too need moar low.

hahaha ...


took me a few days to see they might be a bit big .. ... probably because the ones that came off there were at least 1-inch taller

Baby steps lololol

RedBanner wrote:Baby steps lololol

hahaha

Well... at this point ... it's a waiting game on getting the front trans casing back from the machine shop.
oh yeah... Installed a magical Carter electric fuel pump.


g exhaust 004 by 71240z, on Flickr

Pulled out the 3.36 R-180 to swap for a 4.11 R-180.
( I just about put the 4.375 then decided against it for the moment.. )

Popped off half-shaft nuts and layed the half-shafts aside on the lower suspension a-arms.

g exhaust 038 by 71240z, on Flickr


g exhaust 036 by 71240z, on Flickr

Broke the mustache bar nuts loose first , so I don't ruin my ratchet's teeth...

g exhaust 044 by 71240z, on Flickr


g exhaust 048 by 71240z, on Flickr

3.36 R180 is out and on the jack

g exhaust 049 by 71240z, on Flickr

4.11 R180 installed.

dash and tach 020 by 71240z, on Flickr

Tachometer --- Well the sucker is toast ... and I'm sad to see it go since the datsun 240z-280z tach is one my favorite ones of all time ... all time !!!

I've tried to heal it's wounds along the way (mostly staring at it and cursing really..) , but I'll set her aside and see if someone can breath new life into her some-day [] .

I got it working for a bit.. this is with the engine off .. [:rolleyes:]


dash and tach 002 by 71240z, on Flickr


dash and tach 001 by 71240z, on Flickr

Shes coming out...


dash and tach 004 by 71240z, on Flickr

The right and left turn signal indicator bulbs will have to be re-located if I wish to use them ... I'm thinking LED bulbs or something to that effect BUT not obnoxious.


dash and tach 006 by 71240z, on Flickr

Not overly concerned with tach lighting bulbs ... but I shall preserve them or at least the connections.


dash and tach 007 by 71240z, on Flickr

Just feels so wrong gutting her like this ... it's like pulling an eye out.. doh !!!


dash and tach 009 by 71240z, on Flickr


dash and tach 010 by 71240z, on Flickr


dash and tach 012 by 71240z, on Flickr

I have a replacement lined up and more on that later when it comes in the mail [:sneaky:]

I had forgotten I bought an s30 dash half-cap years ago , and stored it on the upped closet shelf .. derP !!! [:lol:]


dash and tach 013 by 71240z, on Flickr

Does just laying it on the dash.. count as an install ?... [:lol:]


dash and tach 017 by 71240z, on Flickr


dash and tach 019 by 71240z, on Flickr

As thin as this is ... I won't be suprised if it warps and/or cracks like the original.

Honestly... years ago I didn't like half-caps AT ALL ...

Now... I'm happy not to just look at mini-grand canyons forming ...

Thanks for reading

DTP

haha. I know what you mean. I no rikey the huge ass canyons either... busted out speaker holes look amazing, too.

izzo wrote:haha. I know what you mean. I no rikey the huge ass canyons either... busted out speaker holes look amazing, too.

right ! oh yeah the speaker hole ones are just f-fff--ffffffaptastic .
it's kinda like "I think I see another one bustin out"
(<--- I'm sure ebery datsun owner is doing that every day to their dash while rolling.. lol)

hahahah yes. I look at mine every time i get in the car to see if its getting worse... all squinty eyed... Good luck finding a crack free b210 dash....

izzo wrote:hahahah yes. I look at mine every time i get in the car to see if its getting worse... all squinty eyed... Good luck finding a crack free b210 dash....

yup yup.. I try not to troll mine as much now (try..)
dash's are just so... bitter/sweet ...

Got a 5" Auto-Meter Sport Competition silver tachometer from a friend. Thanks again [:thumbup:]

This thing is so COOL !!! it looks tons better in person then in picture I assure you...

Pulled it tach out of the box. Look at that shift-light.. mmmmmm... [:D] (not for everyone I understand [;)] )


tach pics 71213 001 by 71240z, on Flickr

slightly different look...in different light []

tach pics 71213 002 by 71240z, on Flickr

This is the shade you see when looking at it in full light (daytime/afternoon).

tach pics 71213 004 by 71240z, on Flickr

not too deep on the depth.

tach pics 71213 005 by 71240z, on Flickr

Had to pull the mounting ring and shift-light off.. (to the side) so it will fit in the dash tach pod.

tach pics 71213 006 by 71240z, on Flickr

Stuffed her in the hole .. perfect fit.
wire it up and ready to go.

tach pics 71213 007 by 71240z, on Flickr

Original s30 speedometers and tachometers are set much deeper into the dash ... via their housings ... can't quite get mine back far enough to make it match without some definite custimization. The other option is to use a different tachometer (around a 3.75-4.5" one) and gut it or use the original s30 tach housing to secure it as well as stuff it farther back. I like having the tachometer closer to be honest at the moment. Don't be fooled though... I love the original s30 tachometers to death.

tach pics 71213 009 by 71240z, on Flickr

perspective shot

tach pics 71213 010 by 71240z, on Flickr

That's it for now.

Thanks for reading.

DTP

mmm!!! I love me some autometer gauges. I had one in my orange five ten. I pulled the driver side vent out and stuffed it in there. was a perfect snug fit... Wired it so the light came on with the key as well so it was just always on...

I have another one I need to install in the B sometime. Tho this one is to big to fit in the dash anywhere I will have to use the mounting thing it came with. Dunno why I haven't installed it yet other than laziness.

haha thanks Tim ! oh yeah same here

I would have done the same with mounting that sucker in the vent hole since it was a snug fit like you said !

Do eeeetttt you loaves the taco-meter !!!
How big is it ?

Wouldn't you like to know

I think the same size, maybe even smaller than yours. The one I have now is autogage, autometers lower end line. still a good tach. Ill try and throw up a pic tonight.