Page 14 of 24
Re: Smaller. Better. Slower. Lower.
Posted: Fri Oct 17, 2014 8:24 pm
by flatcat19
This is more what we were aiming for...
True Life Barbie.
Re: Smaller. Better. Slower. Lower.
Posted: Fri Oct 17, 2014 8:26 pm
by flatcat19
So....
Oregon title. Bill of sale made out to Banner.
How big of a headache is this gonna be to register?
Re: Smaller. Better. Slower. Lower.
Posted: Fri Oct 17, 2014 8:29 pm
by 510freak
mission accomplished?
Re: Smaller. Better. Slower. Lower.
Posted: Fri Oct 17, 2014 8:57 pm
by RedBanner
None. I will write you a letter with a copy of my license tomarow. Giving you the car as a gift. And if you honestly have issues. I will make a dmv trip with you. Shouldnt need either. Since I sighned it over already. And filled a sellers report right before I mailed it to you. Should be golden.
Re: Smaller. Better. Slower. Lower.
Posted: Fri Oct 17, 2014 9:07 pm
by flatcat19
I didn't think there would be major issues. Just curious.
Now tell me about the artwork.
Re: Smaller. Better. Slower. Lower.
Posted: Fri Oct 17, 2014 9:36 pm
by RedBanner
Didnt do it. Laurie conyers did it. Didnt know it was done. But you can put it with your custom clamshell!
Re: Smaller. Better. Slower. Lower.
Posted: Fri Oct 17, 2014 9:41 pm
by flatcat19
Which is sitting on my TV stand as the center piece.
Re: Smaller. Better. Slower. Lower.
Posted: Sat Oct 18, 2014 12:24 am
by RedBanner
You will have a little museum in no time!
Re: Smaller. Better. Slower. Lower.
Posted: Sat Oct 18, 2014 8:02 am
by flatcat19
No. The plan is to put all these parts ON the car. Lol.
Re: Smaller. Better. Slower. Lower.
Posted: Sat Oct 18, 2014 9:15 am
by RedBanner
Need to find you 2 little emmisions cock-off plates for them su carbs.
Re: Smaller. Better. Slower. Lower.
Posted: Sat Oct 18, 2014 10:39 am
by flatcat19
My SUs need a lot of work. And I know nothing about them.
Re: Smaller. Better. Slower. Lower.
Posted: Sat Oct 18, 2014 11:03 am
by uberkevin
Re: Smaller. Better. Slower. Lower.
Posted: Sat Oct 18, 2014 11:03 am
by uberkevin
Re: Smaller. Better. Slower. Lower.
Posted: Sat Oct 18, 2014 11:04 am
by uberkevin
More photos are much needed in this thread!!
Re: Smaller. Better. Slower. Lower.
Posted: Sat Oct 18, 2014 11:08 am
by uberkevin
Needles, gaskets, flouts. Clean!
There's a cool thing I was reading online about "refreshing" SU's. I thought I bookmarked it but I guess not, I'll try to find.
Sending them off to get fixed up is going to be a good bit a moneys. Well either way you'll be spending some doughnuts.
Re: Smaller. Better. Slower. Lower.
Posted: Sat Oct 18, 2014 3:28 pm
by flatcat19
There are a lot of little things missing on these.
Not fully positive of all the little pieces. Not worried about it though.
Re: Smaller. Better. Slower. Lower.
Posted: Sat Oct 18, 2014 3:29 pm
by RedBanner
Orange speed gasket.... that aint fuel proof for sure.
I learned alot messing with the ones I rebuilt. I would volunteer to set them to factory specs. And do the gaskets and what not. Just get them here somehow. And back. There not really hard but easy to mess up. The nozzles are hard to replace/set. But I got a quick tutorial from the guys at z therepy on straighning needles. And settings. It helped a shit-ton.
Re: Smaller. Better. Slower. Lower.
Posted: Fri Oct 24, 2014 2:19 pm
by izzo
Re: Smaller. Better. Slower. Lower.
Posted: Fri Oct 24, 2014 8:11 pm
by flatcat19
Paltech. Anyone heard of them?
http://www.paltech1.com/
Opinions?
Another question...How does one hook up a cable throttle on their SUs?
I have some ideas but not fully sure.
Re: Smaller. Better. Slower. Lower.
Posted: Sat Oct 25, 2014 12:02 am
by Laecaon
Weld an ecentric to the linkage and hold the cable housing with a bracket from the manifold.
I If your shafts dont wobble, they probably dont need a rebuild, just a good cleaning.
