Page 3 of 7
Re: Vancouver Datsun Meet
Posted: Thu Jul 04, 2013 11:32 pm
by Laecaon
Im game for Sunday, and I can pull my friend along in one of his dattos.
Re: Vancouver Datsun Meet
Posted: Fri Jul 05, 2013 5:36 am
by DRIVEN
wayno wrote:I cannot recall how the timing chain timing is done on the A block, I have a book around here somewhere, as I re-did an A15 cam chain timing about 5-6 years ago, the former owner didn't have a clue when they did a headgasket.
I have no issues helping out, I just have to read up on it before I tackle it.
Wayno, you're over-thinking it. A-series isn't OHC so there's no timing to contend with. Just have to get the "special" headbolt in the right location to oil the rocker shaft. They don't get much easier. There was an old Nissan tech trick to give the 2 rear bolts an extra 5lbs of torque to avoid blown head gaskets.
* *
* *
* *
* *
* *
X
More here if you need a refresher:
http://datsun1200.com/modules/mediawiki ... ead_Gasket
Re: Vancouver Datsun Meet
Posted: Fri Jul 05, 2013 8:17 am
by RedBanner
DRIVEN wrote:wayno wrote:I cannot recall how the timing chain timing is done on the A block, I have a book around here somewhere, as I re-did an A15 cam chain timing about 5-6 years ago, the former owner didn't have a clue when they did a headgasket.
I have no issues helping out, I just have to read up on it before I tackle it.
Wayno, you're over-thinking it. A-series isn't OHC so there's no timing to contend with. Just have to get the "special" headbolt in the right location to oil the rocker shaft. They don't get much easier. There was an old Nissan tech trick to give the 2 rear bolts an extra 5lbs of torque to avoid blown head gaskets.
* *
* *
* *
* *
* *
X
5 extra pounds? Never heard that, might explain some things.
More here if you need a refresher:
http://datsun1200.com/modules/mediawiki ... ead_Gasket
Re: Vancouver Datsun Meet
Posted: Fri Jul 05, 2013 8:46 am
by Jamee
You guys are awesome.
Re: Vancouver Datsun Meet
Posted: Fri Jul 05, 2013 9:28 am
by 12honderd
they have a fuckin boobs button!!! Anyways we should get that shit rollin again you were you thinking this sunday coming up???
Re: Vancouver Datsun Meet
Posted: Fri Jul 05, 2013 9:29 am
by 12honderd
Dammit my phone is wiggin out and didnt show me the rest of the convo... newb mistake. Might see you huys there
Re: Vancouver Datsun Meet
Posted: Fri Jul 05, 2013 10:04 am
by Devious620
No worries man. I'll see ya'll Sunday!
Re: Vancouver Datsun Meet
Posted: Fri Jul 05, 2013 1:47 pm
by wayno
DRIVEN wrote:wayno wrote:I cannot recall how the timing chain timing is done on the A block, I have a book around here somewhere, as I re-did an A15 cam chain timing about 5-6 years ago, the former owner didn't have a clue when they did a headgasket.
I have no issues helping out, I just have to read up on it before I tackle it.
Wayno, you're over-thinking it. A-series isn't OHC so there's no timing to contend with. Just have to get the "special" headbolt in the right location to oil the rocker shaft. They don't get much easier. There was an old Nissan tech trick to give the 2 rear bolts an extra 5lbs of torque to avoid blown head gaskets.
* *
* *
* *
* *
* *
X
More here if you need a refresher:
http://datsun1200.com/modules/mediawiki ... ead_Gasket
Your correct, it's been so long since I worked on one, that I forgot that it has pushrods instead of a chain, where is this project at?
Maybe that engine I bought had the timing chain on the front of the block done by someone that was clueless, as I had to re-do it, then the engine ran great, I can likely help, but I don't know where to go, and I ask again, is there a good head ready to be installed?
wayne
Re: Vancouver Datsun Meet
Posted: Fri Jul 05, 2013 4:24 pm
by wayno
I just realized that I have to go to a wedding Sunday at 1pm, I cannot make this meet this time.
Re: Vancouver Datsun Meet
Posted: Fri Jul 05, 2013 4:29 pm
by devilsbullet
lol, we have to get jamees approval before any of us go messing with her car...I was just throwing out ideas of ways that he boytoy wouldn't get jealous having one (or multiples) of us do it lol.
Re: Vancouver Datsun Meet
Posted: Fri Jul 05, 2013 5:05 pm
by Devious620
somebodies Gotta Show Her.
Re: Vancouver Datsun Meet
Posted: Fri Jul 05, 2013 5:24 pm
by devilsbullet
lol, hell, someones gotta show me still...haven't had the pleasure/pain of having to do that to a car yet, been lucky(kinda).
Re: Vancouver Datsun Meet
Posted: Fri Jul 05, 2013 6:24 pm
by DRIVEN
There's really no reason she needs any of us to do it for her. The A-series is probably THE easiest engine to learn to work on. She could certainly handle it herself with basic tools.
Jamee, if you start a head replacement project thread I'll bet you'd have several real-time helpers to answer any questions or talk you through it. Best part is not having to deal with any of us weirdos in person
.
Re: Vancouver Datsun Meet
Posted: Fri Jul 05, 2013 6:35 pm
by RedBanner
Devious620 wrote:somebodies Gotta Show Her.
I think she could do it on her own. Shes bright, and has the motivation.
I think she was right about the territory aspect. Hes a cool guy, but he doesnt want anyone but him to do it.
And he hasnt done it.
:!: he will. But by now the cam , rokkers, pushrods, crank, cylender walls- rings, bearings are all rusted. Had alot of fluid in it. For several months now.
Re: Vancouver Datsun Meet
Posted: Fri Jul 05, 2013 6:40 pm
by Jamee
lol I would love to deal with you weirdos in person! I love weirdos
Im a super weirdo/pervert so its cool
But, to be fair, the living situation that my man and I are in we are obligated to do work/chores if asked. and he ended having to build a shed and fix 2 cars. I know it isnt an excuse to let my car sit for 4 months. I'm just saying, there was reason to his putting it off. Also I didnt have money the first 2 months.
If/when I get help, I want to be fully involved in the work. I want to be able to fix and work on my car myself.
Re: Vancouver Datsun Meet
Posted: Fri Jul 05, 2013 6:45 pm
by RedBanner
You should just "sell it to me"
Ill "sell" it back to you next month.
Re: Vancouver Datsun Meet
Posted: Fri Jul 05, 2013 6:49 pm
by Jamee
RedBanner wrote:Devious620 wrote:somebodies Gotta Show Her.
I think she could do it on her own. Shes bright, and has the motivation.
I think she was right about the territory aspect. Hes a cool guy, but he doesnt want anyone but him to do it.
And he hasnt done it.
:!: he will. But by now the cam , rokkers, pushrods, crank, cylender walls- rings, bearings are all rusted. Had alot of fluid in it. For several months now.
thanks. Also, Im not doing just a head, Im swapping engines.
Re: Vancouver Datsun Meet
Posted: Fri Jul 05, 2013 6:51 pm
by devilsbullet
RedBanner wrote:You should just "sell it to me"
Ill "sell" it back to you next month.
I like this idea lol. and I had forgotten you were swappin engines jamee, now that you say it I do remember you mentioning that before
Re: Vancouver Datsun Meet
Posted: Fri Jul 05, 2013 7:13 pm
by Jamee
RedBanner wrote:You should just "sell it to me"
Ill "sell" it back to you next month.
haha that is a fanfuckingtastic idea! but how am I spose to get all up in there then? Im dying to wrench.
Re: Vancouver Datsun Meet
Posted: Fri Jul 05, 2013 7:17 pm
by Devious620
your Male Friend Has Issues With Men Helping You. Not You Helping Men.