New World Datsuns...

Driven:
Stock 1200 rear gears are/were 39/10 or 3.90 on all cars,with H145 rear ends, whether manual or automatic transmissions.
The comp catalog listed 4.11, 4.375, 4.625 and 4.750.

Aahh. Yes, but I have an h150. So not so many options.

Well is hoped to get to work on this, it is taking a bit longer to get back up on my foot after Monday tho. What a life changing thing this ankle injury/ neurological disorder has become.
On a possitive note my good friend Doug, of 1200 fame, sent me a idler arm! And I got the Inner tierods from raybestos for 5 bucks a side!

Yay. Its always fun seeing parts come in!

Nice!
I put an H150 in my H145 housing with a homemade spacer. Mine were 3.70s though. For whatever reason the H150 held up just fine after 3 H145s enjoyed short lives. Didn't expect the small size difference would make it that much stronger.

This thing running yet?

Yep. Always runs... A series.
Yeah drivin I'm also running it in a 45 housing. Believe it or not they are rated for almost twice the torque! Something about that extra 5mm... Lol
But they are almost all 3.70s.

So, you'll be over Sunday then?

Cars and Coffee Sunday morning in Richland off Van Geisen

Huh

I havnt been able to do anything for the past week. I'm going to try to do a few things to prep for when I can

So I was up all night without sleep, decided to atleast wire brush and paint my new steering components.

Got a pitman and idler arm from Doug and Adam, thanks a lot guys.

I have a 1200 center link and inner tie rod ends for these Sewell