Re: soon to be LZ2.3 521 :)
Posted: Sun Jul 20, 2014 10:20 pm
Sweet that's what I was going to do..
Thank you.
Now what oil should I get in there?
Thank you.
Now what oil should I get in there?
Page 40 of 66
Re: soon to be LZ2.3 521 :)
Posted: Sun Jul 20, 2014 10:20 pm
Shiiiit.
Re: soon to be LZ2.3 521 :)
Posted: Sun Jul 20, 2014 10:25 pm
Little guy out front.
So I rolled him over to take a pic.
Re: soon to be LZ2.3 521 :)
Posted: Sun Jul 20, 2014 10:37 pm
You know what to do...
Re: soon to be LZ2.3 521 :)
Posted: Sun Jul 20, 2014 10:48 pm
uberkevin ยป Sun Jul 20, 2014 10:20 pm wrote:Sweet that's what I was going to do..
Thank you.
Now what oil should I get in there?
GL-4 "yellow metal safe".
Napa or Baxters.
Re: soon to be LZ2.3 521 :)
Posted: Mon Jul 21, 2014 11:07 am
So some royal purple 80w 90?
I've got some 5w 30 laying around I could use that to brake in the Lz rright? Or is a different weight better to use for that. I've got some zinc additive for it.
I've got some 5w 30 laying around I could use that to brake in the Lz rright? Or is a different weight better to use for that. I've got some zinc additive for it.
Re: soon to be LZ2.3 521 :)
Posted: Mon Jul 21, 2014 5:05 pm
Spending money left an right, had to get the pathfinder a new battery. For some reason my oil cooler hasn't been sent yet so I'm like wtf. For some reason it might get here the 4th of Aug, that can't happen... I sent the seller an email to see what's up? Well see where that goes...
Re: soon to be LZ2.3 521 :)
Posted: Mon Jul 21, 2014 7:32 pm
As for the trans oil...brand doesn't matter, but you want it to be safe for the brass syncros/yellow-safe.
Somewhere there was a pic of the legit stuff to get.
Izzo was searching for yellow-safe GL4?
Royal Purple is great stuff.
But if it is not safe for the brass it will still eat it.
Somewhere there was a pic of the legit stuff to get.
Izzo was searching for yellow-safe GL4?
Royal Purple is great stuff.
But if it is not safe for the brass it will still eat it.
Re: soon to be LZ2.3 521 :)
Posted: Mon Jul 21, 2014 8:00 pm
I use stalube in my transmissions
Re: soon to be LZ2.3 521 :)
Posted: Mon Jul 21, 2014 8:20 pm
Right now I'm looking at redline.
I was thinking royal. Both pretty much the same price, I'll have to look at the royal purple site.
I'll stop by a napa store and see what they have as well.
I was thinking royal. Both pretty much the same price, I'll have to look at the royal purple site.
I'll stop by a napa store and see what they have as well.
Re: soon to be LZ2.3 521 :)
Posted: Mon Jul 21, 2014 8:32 pm
Royal purple is safe on all "yellow" metals, according to their site.
Re: soon to be LZ2.3 521 :)
Posted: Mon Jul 21, 2014 8:36 pm
Re: soon to be LZ2.3 521 :)
Posted: Mon Jul 21, 2014 8:39 pm
That's exactly what I was looking at.
Re: soon to be LZ2.3 521 :)
Posted: Mon Jul 21, 2014 8:41 pm
Royal purple's site isn't specific enough for my liking.
Go with that Redline stuff.
StaLube was the stuff I was speaking of earlier.
Go with that Redline stuff.
StaLube was the stuff I was speaking of earlier.
Re: soon to be LZ2.3 521 :)
Posted: Mon Jul 21, 2014 8:53 pm
This is what I read and where.
"It is non-corrosive to soft yellow metals (brass, bronze, copper, etc.) and synchronizer safe. Specially designed to extend gear and bearing life"
http://www.royalpurpleconsumer.com/products/max-gear/
but I was already thinking about getting redline.
"It is non-corrosive to soft yellow metals (brass, bronze, copper, etc.) and synchronizer safe. Specially designed to extend gear and bearing life"
http://www.royalpurpleconsumer.com/products/max-gear/
but I was already thinking about getting redline.
Re: soon to be LZ2.3 521 :)
Posted: Mon Jul 21, 2014 11:12 pm
Go redline. I have just heard too many complaints about royal purple in general.
Re: soon to be LZ2.3 521 :)
Posted: Tue Jul 22, 2014 7:20 pm
Really cleaned the garage, put the girls quad in the bed of my truck. That way I can have more space to work on it.
Made it so I can use the cherry picker in side.
Made it so I can use the cherry picker in side.
Re: soon to be LZ2.3 521 :)
Posted: Wed Jul 23, 2014 9:06 pm
Thinking about getting this head gasket.
http://datsunpartsllc.com/cart/index.ph ... &parent=30
I have no problem trying to make one out of the Z24 hg but if I can buy one that doesn't need to be modified then I'll get it.
I guess my main concern is if it's the right thickness.
http://datsunpartsllc.com/cart/index.ph ... &parent=30
I have no problem trying to make one out of the Z24 hg but if I can buy one that doesn't need to be modified then I'll get it.
I guess my main concern is if it's the right thickness.
Re: soon to be LZ2.3 521 :)
Posted: Wed Jul 23, 2014 9:12 pm
That's a deal as far as I am concerned, I think I had to make 4 of them gaskets, I was very tired of making headgaskets.
It looks like it has all the holes already also, I am thinking about getting one myself.
It looks like it has all the holes already also, I am thinking about getting one myself.
Re: soon to be LZ2.3 521 :)
Posted: Wed Jul 23, 2014 9:22 pm
Haha. There was a guy over there on ratsun saying he could get some but that never worked out. Thank you Wayno, looks like I'll be getting one, ha maybe two but shouldn't need to. This thing is going to get takin apart an put back together with some NPR pistons. While I'm doing that I'll check that everything is right an to spec.. wow I ended up getting arp bolt everything..
Almost there.
Fuck if I don't get a cherry picker I have a plan for getting everything in the truck. MMaybe just a little more work. Ha hell no way more work but whatever...
Almost there.
Fuck if I don't get a cherry picker I have a plan for getting everything in the truck. MMaybe just a little more work. Ha hell no way more work but whatever...