Re: soon to be LZ2.3 521 :)
Posted: Wed Aug 27, 2014 8:22 pm
DONT DO THIS.
DONT DO THIS.
Page 49 of 66
DONT DO THIS.
Re: soon to be LZ2.3 521 :)
Posted: Wed Aug 27, 2014 8:23 pm
DO THIS!
Re: soon to be LZ2.3 521 :)
Posted: Wed Aug 27, 2014 8:24 pm
It was a bitch to fix the fuckup.
Re: soon to be LZ2.3 521 :)
Posted: Wed Aug 27, 2014 8:27 pm
It's a bitch getting in there the wrong way. 
Re: soon to be LZ2.3 521 :)
Posted: Wed Aug 27, 2014 8:45 pm
I'll be making the 521 my new job tomorrow...
today was the last day of work at the wash.
today was the last day of work at the wash.
Re: soon to be LZ2.3 521 :)
Posted: Thu Aug 28, 2014 4:08 am
Make shit happen!
Re: soon to be LZ2.3 521 :)
Posted: Thu Aug 28, 2014 8:15 pm
Um...your job was supposed to be to come over to my place today for the 620.
Re: soon to be LZ2.3 521 :)
Posted: Thu Aug 28, 2014 11:47 pm
Took this out off the rear main cap.
Re: soon to be LZ2.3 521 :)
Posted: Thu Aug 28, 2014 11:55 pm
Had to take these things off so I can replace the bushings.
Re: soon to be LZ2.3 521 :)
Posted: Thu Aug 28, 2014 11:56 pm
This bushing.
Re: soon to be LZ2.3 521 :)
Posted: Fri Aug 29, 2014 12:05 am
While I was at it I changed this
Re: soon to be LZ2.3 521 :)
Posted: Fri Aug 29, 2014 12:06 am
Re: soon to be LZ2.3 521 :)
Posted: Fri Aug 29, 2014 12:15 am
I got it in and lubed up.. tomorrow I'll be doing the other side. Also got the exhaust and Sus bolted on.
I wasn't home very long but I feel I got a lot done. Oh flatcat I've got you down pipe waiting to bring over. Chris must not wanna touch his datto unless it's at his house or something. I never can get a hold of him. I'll push him harder! That fuck needs to fix his datto.
Oil cooler has got oil in it, I will put oil in the block tomorrow. I'm waiting on ngk wires. The order I placed online for some wires was dropped for some reason... I think do to my new debit card but I don't have any and I called around and can't get any. Napa couldn't at least. I'll place another order. Amazon had them I'll get them from there.
Re: soon to be LZ2.3 521 :)
Posted: Fri Aug 29, 2014 10:31 am
If you have an old set you can take them to Baxter's and they will cut you a set of MSD wires on the spot.
At least all the Baxter's shops in Portland did that.
At least all the Baxter's shops in Portland did that.
Re: soon to be LZ2.3 521 :)
Posted: Fri Aug 29, 2014 11:27 am
You gonna have this thing running before you get 50 pages?
Re: soon to be LZ2.3 521 :)
Posted: Fri Aug 29, 2014 11:54 am
What? I have never heard of that...flatcat19 » Fri Aug 29, 2014 11:31 am wrote:If you have an old set you can take them to Baxter's and they will cut you a set of MSD wires on the spot.
At least all the Baxter's shops in Portland did that.
Re: soon to be LZ2.3 521 :)
Posted: Fri Aug 29, 2014 7:09 pm
Over the years I have had many sets made there.
Milwaukie, Beaverton, Tigard, Vancouver.
If they didn't have goofy plug ends(Honda, Toyota, Nissan) no problems.
Milwaukie, Beaverton, Tigard, Vancouver.
If they didn't have goofy plug ends(Honda, Toyota, Nissan) no problems.
Re: soon to be LZ2.3 521 :)
Posted: Sat Aug 30, 2014 12:01 pm
Small leak is an even smaller leak now. Oh also THE BITCH STARTED!!
I know I have a small down tube gasket problem so I'll be fixing that and getting the thermostat gasket shit figured out maybe the housing is all jacked up and I didn't notice.. I'll see what I can do about a video
exhaust system isn't hooked up. Also gotta bang out a u joint and fit the 720 slip yoke onto the 520 one piece.. never done one...
Oh and baxters here doesn't do that flatcat.
Well the dude I talked to sounded fucking clueless to what I was talking about.. I picked up some cheapo ones for the time being. NGKS should be on the way this time.
I know I have a small down tube gasket problem so I'll be fixing that and getting the thermostat gasket shit figured out maybe the housing is all jacked up and I didn't notice.. I'll see what I can do about a video
exhaust system isn't hooked up. Also gotta bang out a u joint and fit the 720 slip yoke onto the 520 one piece.. never done one...
Oh and baxters here doesn't do that flatcat.
Well the dude I talked to sounded fucking clueless to what I was talking about.. I picked up some cheapo ones for the time being. NGKS should be on the way this time.
Re: soon to be LZ2.3 521 :)
Posted: Sat Aug 30, 2014 12:43 pm
521 lz2.3 first startup/run:
Re: soon to be LZ2.3 521 :)
Posted: Sun Aug 31, 2014 8:09 pm
Today I hammered out the ujoint to put the 720 slip yoke onto the 520 one piece. Since the ujoint is bran new, I just reused the one I had put on a few week back at a shop. Ha. However i bent one of the U clips so I'll be getting a new ujoint. Haha