The Killer B
Posted: Tue Jul 02, 2013 9:27 am
Got this B from Banner. Shoot, I bought this from him Feb of last year. This is the second longest I've owned a car. 14 months Longest was my 80 720. had that one three years.
Fast forward to Feb of last year..
Here it is sitting my driveway. I had just split up with my ex. So the purchase of this was on the down low. Ignore the oil on the ground, that's from her 97 voyager.
A drunken night in a field proved to be bad.
A trip to banners house... Good to go again!
Ownership finally on paper!
Randomness
Next was to remove the bumper and make a bozo pipe for this bad boy...
High resolution graphic design made in a really expensive photo editing program (three seconds in MS paint to be exact )
Making it happen
First, pull the rusty truck out of the car port
Second, find the dead rat....
Braaaaaaaap. Along with this, the muffler was removed and a 14" resonator was installed. This car makes a perfect sound....
Next... Pop a head gasket, check... Replace head gasket, ok!
Next step. Bust a head bolt in the block... Then smash a nut on it with a 5lb sledge, run a bead around it... Done!
Head installed... Didn't take any more pictures after this. pretty self explained. Install head, torque bolts, set valves, put together.. Vrooom!!
Next, the goon needed a new motor. And well, pull the passenger seat, put the motor in there and haul it home... Its what us without a truck do, yo.
Fast forward to Feb of last year..
Here it is sitting my driveway. I had just split up with my ex. So the purchase of this was on the down low. Ignore the oil on the ground, that's from her 97 voyager.
A drunken night in a field proved to be bad.
A trip to banners house... Good to go again!
Ownership finally on paper!
Randomness
Next was to remove the bumper and make a bozo pipe for this bad boy...
High resolution graphic design made in a really expensive photo editing program (three seconds in MS paint to be exact )
Making it happen
First, pull the rusty truck out of the car port
Second, find the dead rat....
Braaaaaaaap. Along with this, the muffler was removed and a 14" resonator was installed. This car makes a perfect sound....
Next... Pop a head gasket, check... Replace head gasket, ok!
Next step. Bust a head bolt in the block... Then smash a nut on it with a 5lb sledge, run a bead around it... Done!
Head installed... Didn't take any more pictures after this. pretty self explained. Install head, torque bolts, set valves, put together.. Vrooom!!
Next, the goon needed a new motor. And well, pull the passenger seat, put the motor in there and haul it home... Its what us without a truck do, yo.