New World Datsuns...

Massive datsun parts, and datsun vehicle sale coming soon to a forum near you.


Couple trucks, possibly a 411, L20 that has been machined, new pistons in it, 620 dashboards, parts parts parts parts, running L20, 5 speed, etc etc etc etc parts parts parts parts...

email is coming to me soon with general parts, some pictures etc.... Will bump and unlock the thread when it comes... Get prepared, enough shit to lower the value on the current market

Oh yeah, located in Gearhart OR

All parts 620, unless specified otherwise.
BUMP

Black 74 620. needs work.
I redid the wiring for the external regulator, needs 2 wires finished (the t plug at the alternator)
Needs rear window installed, hood installed, light buckets and lights, grille installed, seats bolted down. I had it running but the head was destroyed. Replaced head and thats how it sits. Needs intaked installed along with a weber as original carb is garbage and leaks badly. Has bills of sales from titled owner (it's been passed around a bit) but all bills of sales are accounted for and the title. Nice fatty deep dish 15x8 or so rims. Passenger side has a little rash, but brand new tires with 0 miles. worth a couple hundred by themselves at least. Brand new lugs, all 24.
^^^ $500

411. no title, oregon car, bills of sales are there. That's all you need in oregon. Bills of sales and a trip to the DMV. You front the coin and I will go to the dmv and put it in my name if you want to be sure. Make a fair offer. I don't think theres any seats in it, I do believe motor and trans are still there. Don't know if it runs, been setting a while.

Blue KC, 77. Runs, rod knock. Decent condition. I think there was 1 hole in the rocket. And a lean dent in the fender. Has a weber carb, IDK if 4 or 5 speed tho sorry. Still runs with a battery just knocks.
^^^^$$$ 1200, May throw in a running L20 at that price (known good motor)

Known good running L20
Machine L20
Good L20 to be rebuilt
Z22 block
Stock fenders in decent shape
Doors
Fenders
HOods
Tail gates
Tail gate in process of being shaved
Repop door
Dash boards
Many many many many misc parts
5 speed
drive lines
Core support (maybe it was just a valance)
intakes
5 rebuildable webers
lights
headlight buckets
alternators
im sure theres some starts laying around
im sure there's headlight/wiper switches laying around
L16 with peanut head
Heads
A87 heads
U67 head
Dual plane offenhauser intake

PARTS PARTS PARTS lol


All this stuff is for sale as a LOT for 3000, or make a fair offer on individual parts.. He is motivated but has spent a large sum of money on all this stuff as he was planning on building these trucks. So the doors and fenders and such are decent shape, hoods etc...


SR20 620 procjet - $4000
SR engine include, i do believe the trans wiring and harness are there too.
Nice KC body / Red
Frame is on work horses. It's been blasted and painted, waiting for you to come and swoop it and build yourself the meanest 620 king cab ever. No pics no pics no pics sorry.

offer expires on all this march 31st

^^^ Look up and read, thread unlocked. I know, pics pics pics... Am working on those, and prices. for now I don't want to blow his phone up with prices on every part, make a fair offer. If it works it works. If not then not... Ill try and get at least a general idea what he's asking on his parts.

I'll take the fenders if the price is right. I really just need the drivers side. But I'd take both.

Looking for any square port peanut head if he has one...

Will try and get a price. Sorry, he is not answering phone right now as he has appointments today lol. And i am at work. gonna try and catch up with him tonight. IDK what a fair price is on 620 fenders these days.

He has a W53 peanut head...

No problem.

Saw that he had the W53 on the FB post. I don't want to have to shave anything too much, cause my compression is already high as it is lol.

I plan on building the head, so any square port peanut will do.

Here is the deal.


That w53 was on the blue wagon of mine. it had shit compression. I replaced the head gasket and got the EXACT same compression reading. I would suspect it wasn't the head being warped as pistons being bad. replacing the head gasket and re-torqueing the head should have yeilded a different result at the least. I'd say it was bottom end.

I am not getting paid coin to help him out, its just a favor thing as he's been a good friend to me. I may get something in payment, tho

If i get time i will yank the head and throw a level on it.

Ok, we'll I'm definitely interested. I'll even make the trip up there Saturday to check it out...

Let me know what you find out. No rush...

Sweet sauce boss! Will do. Will update thread with prices and pics as they get to me.

Thanks for posting this

izzo wrote:



411. no title, oregon car, bills of sales are there. That's all you need in oregon. Bills of sales and a trip to the DMV. You front the coin and I will go to the dmv and put it in my name if you want to be sure. Make a fair offer. I don't think theres any seats in it, I do believe motor and trans are still there. Don't know if it runs, been setting a while.

This looks like a later '66 or a '67 411 to me. I will send you a PM with my questions on this baby!

Some random pics of some parts and such.

Tell me more about this 5 speed you speak of.

wondering if any door panels - drivers black 78, 1 yr design only.

I spy blue tailgate!!!!

flatcat19 wrote:Tell me more about this 5 speed you speak of.

Works great, needs car to function though.

draker wrote:

flatcat19 wrote:Tell me more about this 5 speed you speak of.

Works great, needs car to function though.

I can't just bolt it to my engine here in the kitchen?
Vroom-vroom myself around the dinner table?

Haha, actually lul'd on that.

OK, I'd like to make an appointment to come out and see what all he's got that I might want. The 620 Back Glass is one item, plus some of the odds and ends too. How would I go about making the arrangements to come out from Vancouver? Tomorrow (Friday, Feb 28th) would be excellent unless the snow gets here.