Leak from headgasket

User avatar
izzo
Site Admin
Posts: 5651
Joined: Wed Jun 26, 2013 6:32 pm
Title: Save a pimp, Rent a bitch.
Cars: Too many
Location: Astoria, OR
Contact:

Re: Leak from headgasket

#21

Post by izzo » Sun Oct 13, 2013 12:15 pm

lol. I try and do a head gasket last, always. It can be done in a day. but, I like taking my time over a few days to do it.
8========D ~~~ ( o Y o )
jayden71: titty ponk
devilsbullet wrote: 1400 obo. and best offer doesn't mean 300 bucks you cheap bastards

User avatar
Laecaon
Site Admin
Posts: 4787
Joined: Wed Jun 26, 2013 7:21 pm
Cars: '71 510 Wagon, 02 BMW 325i Wagon
Location: PDX, West side.
Has thanked: 288 times
Been thanked: 329 times

Re: Leak from headgasket

#22

Post by Laecaon » Sun Oct 13, 2013 12:16 pm

I did my last head gasket in 2 hours...

blueghost510
Posts: 39
Joined: Thu Sep 05, 2013 4:03 pm

Re: Leak from headgasket

#23

Post by blueghost510 » Sun Oct 13, 2013 2:17 pm

Thats pretty damn fast!

I've been out there messing around with it for the last few hours. There were two bolts missing on the exhaust manifold. It took me two hours to get one, and have been working on the second for an hour.

User avatar
draker
Posts: 2539
Joined: Fri Jun 28, 2013 2:44 pm
Cars: 1969 Datsun 510 - 4 door
1971 Datsun 510 - 2 door
1992 Nissan 300ZX Twin Turbo
2002 Tacoma Double Cab 4x4
Location: Eugene, Or
Been thanked: 1 time

Re: Leak from headgasket

#24

Post by draker » Sun Oct 13, 2013 3:24 pm

Laecaon wrote:I did my last head gasket in 2 hours...
You have a mill in your garage?

:troll:

User avatar
Laecaon
Site Admin
Posts: 4787
Joined: Wed Jun 26, 2013 7:21 pm
Cars: '71 510 Wagon, 02 BMW 325i Wagon
Location: PDX, West side.
Has thanked: 288 times
Been thanked: 329 times

Re: Leak from headgasket

#25

Post by Laecaon » Sun Oct 13, 2013 4:13 pm

draker wrote:
Laecaon wrote:I did my last head gasket in 2 hours...
You have a mill in your garage?

:troll:
Imagine blowing a head gasket, but not warping the head... yea that happened 3 times on my friends truck.

User avatar
datsunmike
Posts: 554
Joined: Sat Jun 29, 2013 1:07 pm
Location: 49. 37. 124. 75
Been thanked: 1 time

Re: Leak from headgasket

#26

Post by datsunmike » Sun Oct 13, 2013 6:05 pm

Swapped an L20B into my 521 back in the late 7s. A buddy had blown the HG on it and fixed it. It blew on me so I replaced it figuring he fucked up. Two weeks later it blew again so I replaced the head with the one from my 510 while it was out getting milled. Put the U67 back on again and ok. So, four HGs in less than a month. I could remove it in 45 min. with everything clean and torqued from the previous 3 times and no surprises. I don't think I could have beat 2 hours to finish it. Probably an afternoon to do.
My Datsuns, like good friends, have never let me down. At least in any way that was not understandable and thus fixable.

User avatar
Laecaon
Site Admin
Posts: 4787
Joined: Wed Jun 26, 2013 7:21 pm
Cars: '71 510 Wagon, 02 BMW 325i Wagon
Location: PDX, West side.
Has thanked: 288 times
Been thanked: 329 times

Re: Leak from headgasket

#27

Post by Laecaon » Sun Oct 13, 2013 7:22 pm

It helps to have ratcheting wrenches, and manifolds that give more room. Also a drill with a 1/4inch drive for sockets...

The SU manifold allows for a straight shot to all bolts/nuts that hold the manifolds on.

User avatar
izzo
Site Admin
Posts: 5651
Joined: Wed Jun 26, 2013 6:32 pm
Title: Save a pimp, Rent a bitch.
Cars: Too many
Location: Astoria, OR
Contact:

Re: Leak from headgasket

#28

Post by izzo » Wed Oct 23, 2013 7:24 am

^^^ and a stock L20 is a pain in the ass. i have ratcheting wrenches and its still a pain in the dick getting to the manifolds. almost easier pulling the motor to get to the bottom ones...

If you do get them off, just swap with different manifolds if possible.
8========D ~~~ ( o Y o )
jayden71: titty ponk
devilsbullet wrote: 1400 obo. and best offer doesn't mean 300 bucks you cheap bastards

User avatar
flatcat19
Posts: 5233
Joined: Thu Jun 27, 2013 11:53 am
Title: AKA Smoke
Cars: Smaller. Better. Slower. Lower.
Location: Where you aren't.
Has thanked: 12 times
Been thanked: 32 times

Re: Leak from headgasket

#29

Post by flatcat19 » Wed Oct 23, 2013 6:51 pm

BG...when tightening your bolts make sure the studs are tight and seated as well.



Anyone ever try to take Z-series manifolds off? Horrible.
I found with the last L I took apart in-car, a universal joint was the trick for those bottom nuts/bolts.

User avatar
datsunmike
Posts: 554
Joined: Sat Jun 29, 2013 1:07 pm
Location: 49. 37. 124. 75
Been thanked: 1 time

Re: Leak from headgasket

#30

Post by datsunmike » Wed Oct 23, 2013 8:15 pm

Yes probably at the least a half dozen. Exhaust are easy to get at but sometimes the stud backs out. You must mean the intake? Probably the same number but I always took the head off first.
My Datsuns, like good friends, have never let me down. At least in any way that was not understandable and thus fixable.

User avatar
izzo
Site Admin
Posts: 5651
Joined: Wed Jun 26, 2013 6:32 pm
Title: Save a pimp, Rent a bitch.
Cars: Too many
Location: Astoria, OR
Contact:

Re: Leak from headgasket

#31

Post by izzo » Wed Oct 23, 2013 8:50 pm

I never had issues with Z series. seemed to have more room for me lol... except that lowered ST i had. that was a pain in the dick cuz of the angle.
8========D ~~~ ( o Y o )
jayden71: titty ponk
devilsbullet wrote: 1400 obo. and best offer doesn't mean 300 bucks you cheap bastards

blueghost510
Posts: 39
Joined: Thu Sep 05, 2013 4:03 pm

Re: Leak from headgasket

#32

Post by blueghost510 » Wed Oct 23, 2013 8:55 pm

Got out there and actually changed the intake/exhaust gasket yesterday. No more leaking or exhaust tick!!!!

After 2+ hours previously trying to get bolts on the the exhaust manifold was dreading taking off the exhaust and carb to do it again. What I ended up doing was putting the nuts on the top of the manifold first. Then putting the bolts and washer half way on. Was able to sneak the intake manifold in place and simply tighten it all up. No looking for bolt holes hidden under the manifold and trying to get a straight shot on them without stripping them out! Took less than two hours from start to finish. Runs like a top now.[img][//Users/ryangreenly/Desktop/620 pickup/Datsun truck.jpgimg]

blueghost510
Posts: 39
Joined: Thu Sep 05, 2013 4:03 pm

Re: Leak from headgasket

#33

Post by blueghost510 » Wed Oct 23, 2013 8:56 pm

/Users/ryangreenly/Desktop/620 pickup/Datsun truck.jpg

blueghost510
Posts: 39
Joined: Thu Sep 05, 2013 4:03 pm

Re: Leak from headgasket

#34

Post by blueghost510 » Wed Oct 23, 2013 8:56 pm

Tried submitting a picture of the truck.... no luck.

User avatar
flatcat19
Posts: 5233
Joined: Thu Jun 27, 2013 11:53 am
Title: AKA Smoke
Cars: Smaller. Better. Slower. Lower.
Location: Where you aren't.
Has thanked: 12 times
Been thanked: 32 times

Re: Leak from headgasket

#35

Post by flatcat19 » Wed Oct 23, 2013 9:47 pm

post photo to PB. c/p IMG code to here.

User avatar
izzo
Site Admin
Posts: 5651
Joined: Wed Jun 26, 2013 6:32 pm
Title: Save a pimp, Rent a bitch.
Cars: Too many
Location: Astoria, OR
Contact:

Re: Leak from headgasket

#36

Post by izzo » Wed Oct 23, 2013 10:07 pm

blueghost510 wrote:Got out there and actually changed the intake/exhaust gasket yesterday. No more leaking or exhaust tick!!!!

After 2+ hours previously trying to get bolts on the the exhaust manifold was dreading taking off the exhaust and carb to do it again. What I ended up doing was putting the nuts on the top of the manifold first. Then putting the bolts and washer half way on. Was able to sneak the intake manifold in place and simply tighten it all up. No looking for bolt holes hidden under the manifold and trying to get a straight shot on them without stripping them out! Took less than two hours from start to finish. Runs like a top now.[img][//Users/ryangreenly/Desktop/620 pickup/Datsun truck.jpgimg]

yeah the exhaust bolts with the thick washers you can put on then slide the intake into place. much easier.
8========D ~~~ ( o Y o )
jayden71: titty ponk
devilsbullet wrote: 1400 obo. and best offer doesn't mean 300 bucks you cheap bastards

User avatar
Laecaon
Site Admin
Posts: 4787
Joined: Wed Jun 26, 2013 7:21 pm
Cars: '71 510 Wagon, 02 BMW 325i Wagon
Location: PDX, West side.
Has thanked: 288 times
Been thanked: 329 times

Re: Leak from headgasket

#37

Post by Laecaon » Wed Oct 23, 2013 10:34 pm

Unless you have a heat riser intake. Both heads I pulled from the junkyards have had them. What a royal pain in the ass.

my w53 head was on a l16 with the heat riser manifolds. In a 76 620...

User avatar
flatcat19
Posts: 5233
Joined: Thu Jun 27, 2013 11:53 am
Title: AKA Smoke
Cars: Smaller. Better. Slower. Lower.
Location: Where you aren't.
Has thanked: 12 times
Been thanked: 32 times

Re: Leak from headgasket

#38

Post by flatcat19 » Wed Oct 23, 2013 10:40 pm

Laecaon wrote:my w53 head was on a l16 with the heat riser manifolds. In a 76 620...

That's an awkward combination.

User avatar
Laecaon
Site Admin
Posts: 4787
Joined: Wed Jun 26, 2013 7:21 pm
Cars: '71 510 Wagon, 02 BMW 325i Wagon
Location: PDX, West side.
Has thanked: 288 times
Been thanked: 329 times

Re: Leak from headgasket

#39

Post by Laecaon » Wed Oct 23, 2013 10:53 pm

Yea, it made me scratch my head. :yuno:

Post Reply