soon to be LZ2.3 521 :)

Post Reply
User avatar
izzo
Site Admin
Posts: 5651
Joined: Wed Jun 26, 2013 6:32 pm
Title: Save a pimp, Rent a bitch.
Cars: Too many
Location: Astoria, OR
Contact:
Contact izzo

Re: soon to be LZ2.3 521 :)

#601

Post by izzo »

lol

i used to mow yards for people when i was a kid. made some dolla bills. blew it on cigs and alcohol. then i got my license and used it for tapes and gas :rofl: the good ol days.

Coming along nicely. So i take it the original bores were still good and just needed a honing? I don't remember and don't want to sift thru the pages to find out.
8========D ~~~ ( o Y o )
jayden71: titty ponk
devilsbullet wrote: 1400 obo. and best offer doesn't mean 300 bucks you cheap bastards
Top
User avatar
flatcat19
Posts: 5233
Joined: Thu Jun 27, 2013 11:53 am
Title: AKA Smoke
Cars: Smaller. Better. Slower. Lower.
Location: Where you aren't.
Has thanked: 12 times
Been thanked: 32 times

Re: soon to be LZ2.3 521 :)

#602

Post by flatcat19 »

izzo wrote:lol

i used to mow yards for people when i was a kid. made some dolla bills. blew it on cigs and alcohol. then i got my license and used it for tapes and gas :rofl: the good ol days.

Coming along nicely. So i take it the original bores were still good and just needed a honing? I don't remember and don't want to sift thru the pages to find out.

Bored to LZ23. KA-E pistons. 2mm over.
Top
User avatar
izzo
Site Admin
Posts: 5651
Joined: Wed Jun 26, 2013 6:32 pm
Title: Save a pimp, Rent a bitch.
Cars: Too many
Location: Astoria, OR
Contact:
Contact izzo

Re: soon to be LZ2.3 521 :)

#603

Post by izzo »

flatcat19 wrote:
izzo wrote:lol

i used to mow yards for people when i was a kid. made some dolla bills. blew it on cigs and alcohol. then i got my license and used it for tapes and gas :rofl: the good ol days.

Coming along nicely. So i take it the original bores were still good and just needed a honing? I don't remember and don't want to sift thru the pages to find out.

Bored to LZ23. KA-E pistons. 2mm over.

Ah ok.

They looked like they were once used is wat made me ask
8========D ~~~ ( o Y o )
jayden71: titty ponk
devilsbullet wrote: 1400 obo. and best offer doesn't mean 300 bucks you cheap bastards
Top
uberkevin
Posts: 848
Joined: Fri Jun 28, 2013 5:12 pm

Re: soon to be LZ2.3 521 :)

#604

Post by uberkevin »

Yeah their used, I was going to do the ka-e swap for the 521 just decided to do thin instead and really I think I'm going to be happier. I love the look of the su's and the L blocks in the 521 bay... It wouldn't look the same if the ka was in there...

Idk.


On and that piston is at tdc.. But as you can see isn't all the way up...
Just want to make sure that's how it should in fact be!?!
Top
User avatar
DRIVEN
Posts: 7696
Joined: Thu Jun 27, 2013 7:05 pm
Location: I've been everywhere
Has thanked: 1204 times
Been thanked: 1180 times

Re: soon to be LZ2.3 521 :)

#605

Post by DRIVEN »

I'm glad you decided to stay L. To me, the KA is just a boring looking engine and it takes a lot to make them attractive. The L doesn't take much detailing to look stunning. Some polished parts and shiny paint along with the slight slant, rounded cover, and a pair of SUs can be almost pornographic.
When the only tool you have is a hammer every problem starts to look like a hippy.
Top
User avatar
izzo
Site Admin
Posts: 5651
Joined: Wed Jun 26, 2013 6:32 pm
Title: Save a pimp, Rent a bitch.
Cars: Too many
Location: Astoria, OR
Contact:
Contact izzo

Re: soon to be LZ2.3 521 :)

#606

Post by izzo »

I agree. I like L series. Glad you're staying this way. Ka-e with side draft carbs would have been dope tho lol
8========D ~~~ ( o Y o )
jayden71: titty ponk
devilsbullet wrote: 1400 obo. and best offer doesn't mean 300 bucks you cheap bastards
Top
uberkevin
Posts: 848
Joined: Fri Jun 28, 2013 5:12 pm

Re: soon to be LZ2.3 521 :)

#607

Post by uberkevin »

I'm really glad I decided to stick with the L!
I remember looking at peoples ka swaps and thinking that they just don't look right... Yeah its nice but isn't what should be there.

However a customer Mani and SUs would look sick on the ka in the engine bay..
Maybe on the next dattto
Top
User avatar
jayden71
Posts: 7799
Joined: Thu Jun 27, 2013 10:44 am
Title: Bewb Captain
Cars: '71 Viagra blue 521
'79 Patina KC 620
Location: Land of Po ta toes

Re: soon to be LZ2.3 521 :)

#608

Post by jayden71 »

DRIVEN wrote:I'm glad you decided to stay L. To me, the KA is just a boring looking engine and it takes a lot to make them attractive. The L doesn't take much detailing to look stunning. Some polished parts and shiny paint along with the slight slant, rounded cover, and a pair of SUs can be almost pornographic.
Almost pornographic??

Throw on a ribbed for her pleasure valve cover for the money shot.
DRIVEN » Tue Nov 04, 2014 6:30 pm wrote:I think Bill might be gettin laid.
Ni10 » Wed Nov 19, 2014 7:56 am wrote: all Datsuns ran when parked.
Top
User avatar
DRIVEN
Posts: 7696
Joined: Thu Jun 27, 2013 7:05 pm
Location: I've been everywhere
Has thanked: 1204 times
Been thanked: 1180 times

Re: soon to be LZ2.3 521 :)

#609

Post by DRIVEN »

Pornophonic?
When the only tool you have is a hammer every problem starts to look like a hippy.
Top
User avatar
jayden71
Posts: 7799
Joined: Thu Jun 27, 2013 10:44 am
Title: Bewb Captain
Cars: '71 Viagra blue 521
'79 Patina KC 620
Location: Land of Po ta toes

Re: soon to be LZ2.3 521 :)

#610

Post by jayden71 »

DRIVEN wrote:Pornophonic?
Indeed
DRIVEN » Tue Nov 04, 2014 6:30 pm wrote:I think Bill might be gettin laid.
Ni10 » Wed Nov 19, 2014 7:56 am wrote: all Datsuns ran when parked.
Top
User avatar
flatcat19
Posts: 5233
Joined: Thu Jun 27, 2013 11:53 am
Title: AKA Smoke
Cars: Smaller. Better. Slower. Lower.
Location: Where you aren't.
Has thanked: 12 times
Been thanked: 32 times

Re: soon to be LZ2.3 521 :)

#611

Post by flatcat19 »

KA-E with a mechanical fuel pump off the head and some R1's, I think, could look faptacular.
Top
uberkevin
Posts: 848
Joined: Fri Jun 28, 2013 5:12 pm

Re: soon to be LZ2.3 521 :)

#612

Post by uberkevin »

I'd say I'm about 40% done..

Image
Top
User avatar
izzo
Site Admin
Posts: 5651
Joined: Wed Jun 26, 2013 6:32 pm
Title: Save a pimp, Rent a bitch.
Cars: Too many
Location: Astoria, OR
Contact:
Contact izzo

Re: soon to be LZ2.3 521 :)

#613

Post by izzo »

Mmm! Now that's hot lol
8========D ~~~ ( o Y o )
jayden71: titty ponk
devilsbullet wrote: 1400 obo. and best offer doesn't mean 300 bucks you cheap bastards
Top
uberkevin
Posts: 848
Joined: Fri Jun 28, 2013 5:12 pm

Re: soon to be LZ2.3 521 :)

#614

Post by uberkevin »

Think I may try to drill the hole needed for the z24 head gasket today..


Looken good!
Image


I'll paint the block, then change core plugs.
Top
uberkevin
Posts: 848
Joined: Fri Jun 28, 2013 5:12 pm

Re: soon to be LZ2.3 521 :)

#615

Post by uberkevin »

Image


Didn't get paint. But a nice little mock up :)
Top
User avatar
jayden71
Posts: 7799
Joined: Thu Jun 27, 2013 10:44 am
Title: Bewb Captain
Cars: '71 Viagra blue 521
'79 Patina KC 620
Location: Land of Po ta toes

Re: soon to be LZ2.3 521 :)

#616

Post by jayden71 »

uberkevin wrote:Image


Didn't get paint. But a nice little mock up :)
SECKSY!!!!
DRIVEN » Tue Nov 04, 2014 6:30 pm wrote:I think Bill might be gettin laid.
Ni10 » Wed Nov 19, 2014 7:56 am wrote: all Datsuns ran when parked.
Top
uberkevin
Posts: 848
Joined: Fri Jun 28, 2013 5:12 pm

Re: soon to be LZ2.3 521 :)

#617

Post by uberkevin »

Image
Image
Top
User avatar
izzo
Site Admin
Posts: 5651
Joined: Wed Jun 26, 2013 6:32 pm
Title: Save a pimp, Rent a bitch.
Cars: Too many
Location: Astoria, OR
Contact:
Contact izzo

Re: soon to be LZ2.3 521 :)

#618

Post by izzo »

nice

what's the scoop on that kawi in the background?
8========D ~~~ ( o Y o )
jayden71: titty ponk
devilsbullet wrote: 1400 obo. and best offer doesn't mean 300 bucks you cheap bastards
Top
uberkevin
Posts: 848
Joined: Fri Jun 28, 2013 5:12 pm

Re: soon to be LZ2.3 521 :)

#619

Post by uberkevin »

So the other day I'm getting ready to drive to a friends to help them out with a few things.. On the way there I noticed this ticking noise.. So later that night I drive long with the ticking still there and told myself, you know check my valve lash in the morning.


Morning comes and I make sure all my clearances are fine I get to the second to last valve intake and my .006 won't fit... Oh OK to tight... I loosen the but needed just like the others annnnnnd I still couldn't get my .006 in there... So I'm pretty confused at this point, I take everything apart rocker arm out lash pad, nuts. Reinstall after cleaning.. Same thing... Can't get the clearance needed... I decided I'd like to know what will fit in there, i then take out a .003 and it doesn't fit so I pull out the .002 and I slides right in...

I've got a problem... Haha.
I'll be taking the head off Monday after I pick up the chain tool from flatcat.
I really hope the valve isn't getting pulled into the head, Idk what's going on.
Its not my l20b flattop piston, u67 head.. However I have another head that I'll be using for the lz23 so I'll swap heads for now if indeed the valve is fucked. Or whatever.
I'm pretty close to having the Lz23 in my truck, found a 620 tranny so I can take its front case. Anyway little shit that's going on. That I've gotta take care.

Sorry if you guys don't understand I suck with word. And long writing...
Top
User avatar
wayno
Posts: 5309
Joined: Thu Jun 27, 2013 8:44 pm
Location: Vancouver WA
Has thanked: 430 times
Been thanked: 1295 times

Re: soon to be LZ2.3 521 :)

#620

Post by wayno »

Sounds like the valve in sinking into the head because you likely have brass seats, and you also likely have your foot deep into the pedal all the time, as a quick fix you can remove the adjustment bolt and then take the nut off of the bolt, shave the nut in half, that way when you put it back, the bolt can go deeper into the head because the nut is shorter, this is a temporary fix.
I have never done this, so I don't know if I really know all the things that need to be done, you may have to shorten the bolt that screws into the head also, but I would just make the nut shorter first.

uberkevin wrote:So the other day I'm getting ready to drive to a friends to help them out with a few things.. On the way there I noticed this ticking noise.. So later that night I drive long with the ticking still there and told myself, you know check my valve lash in the morning.


Morning comes and I make sure all my clearances are fine I get to the second to last valve intake and my .006 won't fit... Oh OK to tight... I loosen the but needed just like the others annnnnnd I still couldn't get my .006 in there... So I'm pretty confused at this point, I take everything apart rocker arm out lash pad, nuts. Reinstall after cleaning.. Same thing... Can't get the clearance needed... I decided I'd like to know what will fit in there, i then take out a .003 and it doesn't fit so I pull out the .002 and I slides right in...

I've got a problem... Haha.
I'll be taking the head off Monday after I pick up the chain tool from flatcat.
I really hope the valve isn't getting pulled into the head, Idk what's going on.
Its not my l20b flattop piston, u67 head.. However I have another head that I'll be using for the lz23 so I'll swap heads for now if indeed the valve is fucked. Or whatever.
I'm pretty close to having the Lz23 in my truck, found a 620 tranny so I can take its front case. Anyway little shit that's going on. That I've gotta take care.

Sorry if you guys don't understand I suck with word. And long writing...
“The difference between genius and stupidly is that genius has its limits” Albert Einstein
Top
Post Reply

Return to “Project Builds”