long time coming 710

User avatar
devilsbullet
Posts: 615
Joined: Thu Jun 27, 2013 5:05 pm
Cars: 75 and 76 280z, 68 510 goon, two 77 710 goons, 77 b210 hatch.
Location: vancouver, wa

Re: long time coming 710

#181

Post by devilsbullet »

Well, when I was in there originally he asked if I wanted gloss, flat, or matte black, or if I wanted some crazy color like green or orange or purple. I thought he was joking so I said purple. We bullshitted for a while about what I was doing with the car and on Wednesday he called to tell me it would be ready on Friday, and then asked if we were still on for purple. Fuck yeah we are! I thought you were kidding but I guess not, do it! Dudes at the shop were laughing so hard when I picked it up lol
User avatar
devilsbullet
Posts: 615
Joined: Thu Jun 27, 2013 5:05 pm
Cars: 75 and 76 280z, 68 510 goon, two 77 710 goons, 77 b210 hatch.
Location: vancouver, wa

Re: long time coming 710

#182

Post by devilsbullet »

The amount of fuckery that's just plain stupid I keep finding is starting to piss me off...
User avatar
DRIVEN
Posts: 7696
Joined: Thu Jun 27, 2013 7:05 pm
Location: I've been everywhere
Has thanked: 1204 times
Been thanked: 1180 times

Re: long time coming 710

#183

Post by DRIVEN »

Fuckery? No, that's just buying a used Datsun. When I first saw my wagon I thought the engine was out. Nope, it had raised rally springs in the front and 2" lowering blocks in the rear. Someone did that on purpose then drove it long enough to completely destroy the front tires.
When the only tool you have is a hammer every problem starts to look like a hippy.
User avatar
devilsbullet
Posts: 615
Joined: Thu Jun 27, 2013 5:05 pm
Cars: 75 and 76 280z, 68 510 goon, two 77 710 goons, 77 b210 hatch.
Location: vancouver, wa

Re: long time coming 710

#184

Post by devilsbullet »

Lol, some of it is buying a used Datsun. The c clamp holding the exhaust to the manifold in place of the missing stud for example. Seats with only 2 bolts holding them in on the other hand, is just dumb fuckery. Especially since one of the two bolts on each seat was a redrilled hole, so it's not like they were lacking the tool to do it. Thin sheet metal wrapped around part of the exhaust and held on by clamps is dumb fuckery. Normal Datsun would just leave any rust holes that may be there lol
User avatar
devilsbullet
Posts: 615
Joined: Thu Jun 27, 2013 5:05 pm
Cars: 75 and 76 280z, 68 510 goon, two 77 710 goons, 77 b210 hatch.
Location: vancouver, wa

Re: long time coming 710

#185

Post by devilsbullet »

Image
Off goes the 510 to her new home...
User avatar
510freak
Global Moderator
Posts: 9706
Joined: Wed Jun 26, 2013 6:44 pm
Title: DJ Jazzy Lou
Cars: Boo no 510 lol
Location: Van Isle
Has thanked: 6 times
Been thanked: 7 times
Contact:

Re: long time coming 710

#186

Post by 510freak »

:(
Going to a good home?
Taterhead » Tue Dec 08, 2015 6:35 am wrote:[quote="Taterhead » Mon Dec 07, 2015 2:41 pm


Sorry, I was channeling my inner flatcat.
User avatar
noflers
Posts: 598
Joined: Mon Jul 11, 2016 7:08 pm
Location: Dundee, OR
Has thanked: 5 times
Been thanked: 22 times

Re: long time coming 710

#187

Post by noflers »

This happens every time I read through an entire build thread.
User avatar
devilsbullet
Posts: 615
Joined: Thu Jun 27, 2013 5:05 pm
Cars: 75 and 76 280z, 68 510 goon, two 77 710 goons, 77 b210 hatch.
Location: vancouver, wa

Re: long time coming 710

#188

Post by devilsbullet »

Yes to a good home, and noflers, the car going away isn't the one the build thread is about. The 710 is still kicking in my garage, my garage just leaks, and it rains a lot up here. The 510 deserved better than my skills could ever give her, and quite honestly I like the styling of the 710 goon better
User avatar
izzo
Site Admin
Posts: 5651
Joined: Wed Jun 26, 2013 6:32 pm
Title: Save a pimp, Rent a bitch.
Cars: Too many
Location: Astoria, OR
Contact:

Re: long time coming 710

#189

Post by izzo »

noflers wrote:This happens every time I read through an entire build thread.
Haha seems to happen to me too. Have seen this many times on ratsun lol
8========D ~~~ ( o Y o )
jayden71: titty ponk
devilsbullet wrote: 1400 obo. and best offer doesn't mean 300 bucks you cheap bastards
User avatar
devilsbullet
Posts: 615
Joined: Thu Jun 27, 2013 5:05 pm
Cars: 75 and 76 280z, 68 510 goon, two 77 710 goons, 77 b210 hatch.
Location: vancouver, wa

Re: long time coming 710

#190

Post by devilsbullet »

At least it wasn't the one the build thread was on
User avatar
510freak
Global Moderator
Posts: 9706
Joined: Wed Jun 26, 2013 6:44 pm
Title: DJ Jazzy Lou
Cars: Boo no 510 lol
Location: Van Isle
Has thanked: 6 times
Been thanked: 7 times
Contact:

Re: long time coming 710

#191

Post by 510freak »

devilsbullet wrote:At least it wasn't the one the build thread was on
right on
Taterhead » Tue Dec 08, 2015 6:35 am wrote:[quote="Taterhead » Mon Dec 07, 2015 2:41 pm


Sorry, I was channeling my inner flatcat.
User avatar
devilsbullet
Posts: 615
Joined: Thu Jun 27, 2013 5:05 pm
Cars: 75 and 76 280z, 68 510 goon, two 77 710 goons, 77 b210 hatch.
Location: vancouver, wa

Re: long time coming 710

#192

Post by devilsbullet »

Image
I used some of the money to buy a boat...family grew to 4 of us, and my step son is about to go through puberty and likely a large size change, plus I'm not exactly tiny either.
User avatar
DRIVEN
Posts: 7696
Joined: Thu Jun 27, 2013 7:05 pm
Location: I've been everywhere
Has thanked: 1204 times
Been thanked: 1180 times

Re: long time coming 710

#193

Post by DRIVEN »

Roadmasters love roadtrips.
When the only tool you have is a hammer every problem starts to look like a hippy.
User avatar
noflers
Posts: 598
Joined: Mon Jul 11, 2016 7:08 pm
Location: Dundee, OR
Has thanked: 5 times
Been thanked: 22 times

Re: long time coming 710

#194

Post by noflers »

Lol, oops. I didn't connect the two cars, they're different colors, and a 510 not a 710...

+1 for boat cars!
User avatar
devilsbullet
Posts: 615
Joined: Thu Jun 27, 2013 5:05 pm
Cars: 75 and 76 280z, 68 510 goon, two 77 710 goons, 77 b210 hatch.
Location: vancouver, wa

Re: long time coming 710

#195

Post by devilsbullet »

Anything specific I should look for driven? The beast has 200k miles, but was pretty well kept.
User avatar
devilsbullet
Posts: 615
Joined: Thu Jun 27, 2013 5:05 pm
Cars: 75 and 76 280z, 68 510 goon, two 77 710 goons, 77 b210 hatch.
Location: vancouver, wa

Re: long time coming 710

#196

Post by devilsbullet »

It's a 94, so lt1 and 4l60e, I know the Trannies can barely handle the power, and the optispark can be a bitch. Other than that, I got a steep learning curve lol
User avatar
DRIVEN
Posts: 7696
Joined: Thu Jun 27, 2013 7:05 pm
Location: I've been everywhere
Has thanked: 1204 times
Been thanked: 1180 times

Re: long time coming 710

#197

Post by DRIVEN »

Biggest potential issue is water pump leaks. That, in itself, isn't really a big deal. But if it's ignored coolant leaks on and into the Optispark (distributor) which can leave you stranded. The LT1 was the bridge between tradition SBC and LS so there were some experiments. Optispark didn't make the cut. They're actually really reliable as long as they aren't water-cooled.
Aside from that just treat it like anything else. Maintain the fluids and keep it in reasonable state of tune.
When the only tool you have is a hammer every problem starts to look like a hippy.
User avatar
DRIVEN
Posts: 7696
Joined: Thu Jun 27, 2013 7:05 pm
Location: I've been everywhere
Has thanked: 1204 times
Been thanked: 1180 times

Re: long time coming 710

#198

Post by DRIVEN »

4L60e was pretty decent by '94. Just service at regular intervals.
When the only tool you have is a hammer every problem starts to look like a hippy.
User avatar
devilsbullet
Posts: 615
Joined: Thu Jun 27, 2013 5:05 pm
Cars: 75 and 76 280z, 68 510 goon, two 77 710 goons, 77 b210 hatch.
Location: vancouver, wa

Re: long time coming 710

#199

Post by devilsbullet »

Mmk. Water pump was changed out in the last 2 years, tranny serviced 2ish years ago, 6 month old ball joints and tie rod ends, fuel pump about 3 years ago, plugs/wires/tune up misc about 2 years ago. Planning on having a shop nearby do a check up on it to give me an idea of what it needs, I know of a few things but I'm sure the old guy I got it from didn't know everything that's wrong with it. Ac has a bad ground somewhere, trunk release from inside the car isn't hooked up, needs a control arm shaft kit and steering shaft is worn some, posi is potentially slipping. But for 1200 bucks, with 800 bucks in receipts for front end work in the last 6 months and 400 bucks worth of tires at about the same time, I can't complain
User avatar
devilsbullet
Posts: 615
Joined: Thu Jun 27, 2013 5:05 pm
Cars: 75 and 76 280z, 68 510 goon, two 77 710 goons, 77 b210 hatch.
Location: vancouver, wa

Re: long time coming 710

#200

Post by devilsbullet »

And yeah, the 4l60e seems to be decent, I've just read that they're close to being overmatched by the lt
Post Reply