BLUE's Copper ZXT

[BLUE]

027 by 71240z, on Flickr


029 by 71240z, on Flickr


030 by 71240z, on Flickr

[BLUE]

031 by 71240z, on Flickr


032 by 71240z, on Flickr


033 by 71240z, on Flickr

[BLUE]

034 by 71240z, on Flickr


035 by 71240z, on Flickr


036 by 71240z, on Flickr

[BLUE]

037 by 71240z, on Flickr


038 by 71240z, on Flickr


040 by 71240z, on Flickr

[BLUE]

041 by 71240z, on Flickr


042 by 71240z, on Flickr


043 by 71240z, on Flickr

[BLUE]

044 by 71240z, on Flickr


045 by 71240z, on Flickr


046 by 71240z, on Flickr

[BLUE]

047 by 71240z, on Flickr


048 by 71240z, on Flickr


049 by 71240z, on Flickr

[BLUE]

050 by 71240z, on Flickr


051 by 71240z, on Flickr


052 by 71240z, on Flickr

[BLUE]

053 by 71240z, on Flickr


054 by 71240z, on Flickr


055 by 71240z, on Flickr

[BLUE]

056 by 71240z, on Flickr


057 by 71240z, on Flickr


058 by 71240z, on Flickr

[BLUE]

059 by 71240z, on Flickr


060 by 71240z, on Flickr


061 by 71240z, on Flickr

[BLUE]

062 by 71240z, on Flickr


063 by 71240z, on Flickr


064 by 71240z, on Flickr

Snap-On flat bar. (measuring warpage.. need to look at a couple of other heads while I have it).

[BLUE]

066 by 71240z, on Flickr

I'll be checking other heads foe warpage while I have this.

[BLUE]

Long story short ... have neighborhood politics that kinda limit what I'm doing for the very moment (weird situation) .... this motor was running fine with no knocks before , so I blew out the oil passages/flushed them then decided to assemble. I didn't want to knock anything loose or disturb anything... (engine was kept covered in between). Exception is cleaning up after hone as well.

Sealed Power main bearings.

005 by 71240z, on Flickr


006 by 71240z, on Flickr


007 by 71240z, on Flickr

[BLUE]

cleaned caps.

008 by 71240z, on Flickr


009 by 71240z, on Flickr

50% STP/50% oil

011 by 71240z, on Flickr

[BLUE]

crank in

012 by 71240z, on Flickr

rear crank seal lip is cut into the crank , but I decided to move the seal forward a bit (should be fine).

013 by 71240z, on Flickr


014 by 71240z, on Flickr

[BLUE]

015 by 71240z, on Flickr


016 by 71240z, on Flickr


017 by 71240z, on Flickr

[BLUE]

018 by 71240z, on Flickr


020 by 71240z, on Flickr


021 by 71240z, on Flickr

[BLUE]

Cheating and putting the rear-main seal in at the same time (yup dust is collecting on the oil).

023 by 71240z, on Flickr

all main caps on

024 by 71240z, on Flickr


025 by 71240z, on Flickr

[BLUE]

026 by 71240z, on Flickr


027 by 71240z, on Flickr

I despise the rear main cap rubber slider thingys/shims system.

028 by 71240z, on Flickr