Adam's annoying ass green 620

[Laecaon]

I know... soon. So very soon.

Sometimes I am indecisive, so instead of problem solving it, I play games. I should have it wrinkled out today. Final assemble tomorrow or thursday or whenever I get the parts...

[Eagle_Adam]

no rush man, its a ways out still. Just anxious.............

[Laecaon]

Well I just ordered the remaining parts from MCMaster Carr.

And because its fun to post pictards, and not a whole lot of people check your thread here...

[Eagle_Adam]

never noticed your name on it before!!!! branding for the win!!!!!!!!!!!!

[izzo]

Nice seat you had for sale there.

I got a sneak peak at a down the road pic of said board. I could fuck it. omnomnom

[Eagle_Adam]

Well, my pops had his hip replacement surgery yesterday, so its game on boys n girls!




picked up one of my KA24DE's from storage along with the 5 speed i got with it

picked up a new clutch too



motor and trans are split


motors on the stand



started pulling things i dont need
fan clutch
EGR
emissions BS
old motor mounts



ended the night with giving the motor a bath in 2 cans of break clean then pulled the cam cover to see what i was working with

[izzo]

Fawk yeah man!

This is gonna be cool when you're done man

[Taterhead]

Awesomeness. That's what you're workin with.

[Eagle_Adam]

part of me really just wants to clean this motor up and run it as is.........


the timing chain looks great, cams look good, ran when pulled, just dirty with a leaking front cover.....




but then part of me is reminding myself of how easy it "should" be to tear it apart

[izzo]

I would rebuild it. You never know how hard it was ran before.

Another thing, IDK about those motors. but the cams look a little dirty, like it didn't get oil changes.

[Eagle_Adam]

ive been looking at build threads and pics for a few weeks now and it seems to be a 50/50 split between what the heads look like


some are perfect and new(fresh outta the machine shop) and the other look like mine(used)


so im not sure of what to make of it. Toying with the idea of sending it to my machine shop for a good cleaning and freshness

[draker]

I'd just do a leakdown with it on the stand. Pull the oil pan and measure bearing clearances.. if those are all good.. run that bitch.

[Eagle_Adam]

may sound newbish...


but ive never done a leak down test b4

[draker]

There isn't much to it. Just as easy as a compression test.. except air comes from an air compressor.

Basically, you put the piston at TDC one by one. Apply compressed air through the spark plug hole with a leakdown tester. It has two gauges. One tells you how much are is applied, one tells you how much is leaking. You just determine how much air is leaking and from where. That should tell you about the engine health. Use that along with the bearing clearances and it will tell you what you want to know.

[draker]

And you don't need a shit ton of air either so a small compressor works just fine.

[Eagle_Adam]

i has no compressor.......... sad i know

[Eagle_Adam]

cool vids for later reference









http://www.ka-t.org/forums/viewtopic.php?t=4156


http://forums.nicoclub.com/s13-head-tea ... 72493.html

[Laecaon]

So, when does the L20 come out?

[Eagle_Adam]

once the A motor goes in the B.....


which should be tonight, i hope

[izzo]

and then?