soon to be LZ2.3 521 :)

[uberkevin]

WRONG AGAIN... still leaking oil with the 521 yoke in..

i mean it doesn't have a driveline attached to it.

[uberkevin]

[uberkevin]

That's the seal I picked up at napa.

It's gotta be the seal!

I've asked for a 83 720 seal and an 85 both didn't work.

[uberkevin]

The

[uberkevin]

The other part number.

[uberkevin]

Looking back to find the year of my trans it's a 85.
I looked up both part numbers. I should be fine.

That means it's the transmission doesn't it?
Hm.

[uberkevin]

To much oil:

[wayno]

Well there is definitely something spraying all over everything, and that is without a driveline connected, the seal isn't working, as that 521 yoke has a plug in the hole, correct?

[uberkevin]

Yep. There a plug in there forsure.
The seal is clearly not working I agree. But wtf! Haha

[wayno]

The transmission vent is clear, correct?, you didn't plug it for any reason, correct?

[uberkevin]

Vent?

[uberkevin]

Didn't plug anything so me not know what the vent is doesn't really matter.

[wayno]

On the shortshaft it is located on the pancake between the alloy front and rear cases.
It's just a tube bent 90 degrees.
If it's leaking on the 521 yoke also, try another seal with a different part number, I heard there were 2 or 3 different ones.

[wayno]

[uberkevin]

Above you can see the two I used. Two different seals, I'll get another new one and see if it's different as well.

If it's just the transmission then I really am fucked!
I guess I can drop It and change it out if I had another like it but it took me a while to even find that one. I guess I could get a Z car trans can't i?

[uberkevin]

Yeah that tube. I wondered what that was. No not plugged. Still bent in a 90 just like that.

[wayno]

When the seal is out, find a good light, and inspect that tailshaft, look for anything that looks like a crack, I hope for you it is just the seal being wrong.

[uberkevin]

[uberkevin]

You see the split? Crack whatever you wanna call it?

[uberkevin]