Really Ratty Rusty Ruby 510/miata
- Taterhead
- Posts: 2488
- Joined: Thu Jul 11, 2013 4:18 am
- Cars: '71 510 - Mine
'72 510 - Sons - Location: Central Alabama
- Has thanked: 1350 times
- Been thanked: 232 times
- Indy510
- Posts: 1084
- Joined: Fri Jun 28, 2013 12:14 am
- Location: SF, Bay Area
- Has thanked: 27 times
- Been thanked: 132 times
Re: Really Ratty Rusty Ruby 510/miata
Where we left off, in March, my dedication was slowly fading. I put the body back on, and the new roof line looked horrible ... (you will see below) ... so I didn't want to update the thread while the car was back in storage. I almost gave up on the whole project.
Before the body went back on, I had to finish welding the roof:
Before the body went back on, I had to finish welding the roof:
Last edited by Indy510 on Wed Aug 08, 2018 2:02 pm, edited 1 time in total.
- Indy510
- Posts: 1084
- Joined: Fri Jun 28, 2013 12:14 am
- Location: SF, Bay Area
- Has thanked: 27 times
- Been thanked: 132 times
Re: Really Ratty Rusty Ruby 510/miata
I achieved the taller (stock-looking) windshield height I wanted, but the roof line only looked "okay" from this angle:
and it looked weird from the side:
and it looked weird from the side:
- Indy510
- Posts: 1084
- Joined: Fri Jun 28, 2013 12:14 am
- Location: SF, Bay Area
- Has thanked: 27 times
- Been thanked: 132 times
Re: Really Ratty Rusty Ruby 510/miata
I took the body back off, drilled three holes down the center line of the roof, and started trying to make the body level and even from the centerline strings:
and started hacking up the doors:
and started hacking up the doors:
- Indy510
- Posts: 1084
- Joined: Fri Jun 28, 2013 12:14 am
- Location: SF, Bay Area
- Has thanked: 27 times
- Been thanked: 132 times
Re: Really Ratty Rusty Ruby 510/miata
I didn't take many pics, but I had to remove all of the body's bracing to get it back to level, centered, and square'ish. Then I added a 1.5"x.75" square tube as rocker panels to keep the doors even both sides:
2dr doors are about 6" longer than 4dr front doors, so I made these 5.5" longer:
2dr doors are about 6" longer than 4dr front doors, so I made these 5.5" longer:
Last edited by Indy510 on Sat Jan 12, 2019 11:08 pm, edited 2 times in total.
- Indy510
- Posts: 1084
- Joined: Fri Jun 28, 2013 12:14 am
- Location: SF, Bay Area
- Has thanked: 27 times
- Been thanked: 132 times
Re: Really Ratty Rusty Ruby 510/miata
I sold the 2dr 710 recently and immediately bought the used Airrex Miata suspension I had been eye'ing for 8 months. Luckily they were still for sale and cheaper too:
So it was time to get rid of this ride height:
So it was time to get rid of this ride height:
- Indy510
- Posts: 1084
- Joined: Fri Jun 28, 2013 12:14 am
- Location: SF, Bay Area
- Has thanked: 27 times
- Been thanked: 132 times
Re: Really Ratty Rusty Ruby 510/miata
Sorry it took so long, but it's lower and here's how much I've had to cut so far. It is definitely structurally compromised:
- DRIVEN
- Posts: 7696
- Joined: Thu Jun 27, 2013 7:05 pm
- Location: I've been everywhere
- Has thanked: 1204 times
- Been thanked: 1180 times
Re: Really Ratty Rusty Ruby 510/miata
This car is nutz.
When the only tool you have is a hammer every problem starts to look like a hippy.
- Taterhead
- Posts: 2488
- Joined: Thu Jul 11, 2013 4:18 am
- Cars: '71 510 - Mine
'72 510 - Sons - Location: Central Alabama
- Has thanked: 1350 times
- Been thanked: 232 times
Re: Really Ratty Rusty Ruby 510/miata
I think it’s the guy.
Obviously my testicles haven’t grown to full capacity enough to attempt such an awesome endeavor. But I love watching it.
Obviously my testicles haven’t grown to full capacity enough to attempt such an awesome endeavor. But I love watching it.